BICHENGPCBBicheng Technologies Limited

面向散热管理应用的 TC600 2 层 30mil ENEPIG 电路板

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

Rogers TC600 laminates are composites of PTFE, thermally conductive ceramic fillers and woven glass reinforcement, which is designed to provide enhanced heat-transfer through "Best-In-Class" thermal conductivity, while reducing dielectric loss and insertion loss. Lower losses result in higher Amplifier and Antenna Gains/Efficiencies. The best-in-class thermal conductivity and mechanical robustness enable printed circuit board (PCB) size reduction. The increased thermal conductivity provides higher power handling, reduces hot-spots and improves device reliability.

Stable Dielectric Constant: 6.15 at 1.8MHz and 10 GHz/23°C Low Loss Performance: Dissipation factor of 0.0017 and 0.0020 at 1.8 and 10 GHz/23°C respectively Superior Thermal Management: High thermal conductivity of 1.1W/mK Temperature Stability: Stable Dk across wide temperature range of -75ppm/°C from -40°C to 140°C Excellent Dimensional Stability: Low coefficient of thermal expansion on X,Y and Z axis (9, 9 and 35 ppm/°C) Environmental Resistance: Low Moisture Absorption 0.03%

Circuit Miniaturization: High dielectric constant for circuit size reduction High Frequency Performance: Low loss, ideal for operating at X-band or below Enhanced Reliability: Low Z-axis expansion, providing reliable plated through holes in multilayer boards Environmental Stability: Low moisture absorption, reducing effects of moisture on electrical loss Consistent Performance: Tight Dk and thickness control for repeatable circuit performance

5. PCB Stackup (2-Layer Rigid Structure)

Copper Layer Top - 18 μm + 17μm plating TC600 Core - 0.762 mm (30mil) Copper Layer Bottom - 18 μm + 17μm plating

Components: 32 Total Pads: 146 Thru Hole Pads: 94 Top SMT Pads: 52 Bottom SMT Pads: 0 Vias: 77 Nets: 2

Power Amplifiers, Filters and Couplers Microwave Combiner and Power Divider Boards in Avionics Applications Small Footprint Antennas Digital Audio Broadcasting (DAB) Antennas (Satellite Radio) GPS & Hand-held RFID Reader Antennas

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

Rogers TC600 2-Layer Thermal Management PCB

规格参数

Base MaterialTC600
Layer CountDouble sided
Board Dimensions112mm × 60mm = 1PC, ±0.15mm
Minimum Trace/Space5/5 mils
Minimum Hole Size0.3mm
Blind ViasNo
Finished Board Thickness0.8mm
Finished Cu Weight1oz (1.4 mils) outer layers
Via Plating Thickness20 μm
表面处理ENEPIG
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskGreen
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment
Design StandardIPC-Class-2
Artwork FormatGerber RS-274-X
AvailabilityWorldwide

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com