BICHENGPCBBicheng Technologies Limited

面向极端环境射频应用的 TLX-8 2 层 31mil 沉金电路板

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

TLX-8 is PTFE fiberglass laminates, a type of high volume antenna material which offers reliability in a wide range of RF applications. This material is versatile due to its wide range available thicknesses and copper cladding. It is suitable for low layer count microwave designs, offering mechanical reinforcement wherever a substrate experiences severe environments such as:

Resistance to creep for PWBs bolted to a housing that encounters high levels of vibration during space launch High temperature exposure in engine modules Radiation resistance in space (see NASA's website for low outgassing materials) Resistance to extreme environments at sea for warship antennas Resistance to a wide temperature range for altimeter substrates during flight

Superior Signal Quality: Excellent PIM Values in PCBs (measured at lower than -160 dBc*) Mechanical Reliability: Excellent Mechanical & Thermal Properties Electrical Stability: Low and Stable Dk, Tightly Controlled DK, Low DF Environmental Durability: Dimensionally Stable, Low Moisture Absorption Safety Certification: UL 94 V0 Rating Design Optimization: For Low Layer Count Microwave Designs

Dielectric Constant @ 10 GHz: 2.55 ±0.04 (IPC-650 2.5.5.3) Dissipation Factor @ 10 GHz: 0.0018 (IPC-650 2.5.5.5.1) Surface Resistivity Elevated Temp.: 6.605 × 10^8 Mohm Surface Resistivity Humidity Cond.: 3.550 × 10^6 Mohm Volume Resistivity Elevated Temp.: 1.110 × 10^10 Mohm/cm Volume Resistivity Humidity Cond.: 1.046 × 10^10 Mohm/cm

MD After Bake: 0.06 mm/M (IPC-650 2.4.39 Sec. 5.4) CD After Bake: 0.08 mm/M (IPC-650 2.4.39 Sec. 5.4) MD Thermal Stress: 0.09 mm/M (IPC-650 2.4.39 Sec. 5.5) CD Thermal Stress: 0.10 mm/M (IPC-650 2.4.39 Sec. 5.5)

X: 21 ppm/°C (IPC-650 2.4.41/ASTM D 3386) Y: 23 ppm/°C (IPC-650 2.4.41/ASTM D 3386) Z: 215 ppm/°C (IPC-650 2.4.41/ASTM D 3386)

2% Weight Loss: 535°C (IPC-650 2.4.24.6 TGA) 5% Weight Loss: 553°C (IPC-650 2.4.24.6 TGA)

Moisture Absorption: 0.02% (IPC-650 2.6.2.1) Dielectric Breakdown: >45 Kv (IPC-650 2.5.6) Flammability Rating: V-0 (UL-94)

5. PCB Stackup (2-Layer Rigid Structure)

Copper Layer 1 - 35 μm Taconic TLX-8 Core - 0.787 mm (31mil) Copper Layer 2 - 35 μm

Components: 11 Total Pads: 34 Thru Hole Pads: 19 Top SMT Pads: 15 Bottom SMT Pads: 0 Vias: 27 Nets: 2

Radar systems Mobile communications Microwave test equipment Microwave transmission devices Couplers, splitters, combiners, amplifiers, antennas

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

TLX-8 2-Layer PCB

规格参数

Base MaterialTLX-8
Layer Count2 layers
Board Dimensions25mm × 71mm = 1PC, ±0.15mm
Minimum Trace/Space4/6 mils
Minimum Hole Size0.3mm
Blind ViasNo
Finished Board Thickness0.8mm
Finished Cu Weight1oz (1.4 mils) outer layers
Via Plating Thickness20 μm
表面处理Immersion Gold
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com