BICHENGPCBBicheng Technologies Limited

Rogers TMM10i 2 层 30mil 沉金电路板 — 高频微波应用

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

起订量
1PCS
交期
7-13 working days
包装
Vacuum / Anti-static Packaging
付款方式
T/T, Paypal

产品简介

Rogers TMM 10i isotropic thermoset microwave material is a ceramic thermoset polymer composite designed for high plated thru-hole reliability strip-line and micro-strip applications. TMM 10i microwave material has an isotropic dielectric constant (Dk). Like the other TMM series materials, TMM 10i combines many of the desirable features of ceramic and PTFE substrates, with the ease of soft substrate processing techniques.

TMM10i laminates have an exceptionally low thermal coefficient of dielectric constant, typically less than 30 ppm/°C. The material's isotropic coefficients of thermal expansion, very closely matched to copper, allow for production of high reliability plated through holes, and low etch shrinkage values. This 2-layer rigid PCB is constructed entirely with TMM10i as the core material, making it ideal for RF and microwave circuitry, power amplifiers, satellite communication, GPS antennas, patch antennas, and chip testers.

Dielectric Constant (Dk): 9.80 ± 0.245 at 10 GHz

CTE matched to copper (X/Y/Z): 19/19/20 ppm/K (0 to 140°C)

Decomposition Temperature (Td): 425 °C TGA

Isotropic dielectric constant (Dk) for consistent performance

Mechanical properties resist creep and cold flow

Resistant to process chemicals, reducing damage during fabrication

Material does not require sodium napthanate treatment prior to electroless plating

Based on thermoset resin, allowing for reliable wire-bonding

Available in thickness range .0015" to .500" ± .0015"

Combines benefits of ceramic and PTFE substrates without specialized production techniques

Exceptional Dk uniformity (9.80 ± 0.245) for consistent impedance control

Low dissipation factor (0.0020) ensures high performance at microwave frequencies

CTE matched to copper enables high reliability plated through holes

High thermal conductivity (0.76 W/m/K) facilitates heat removal

Thermoset resin does not soften when heated, preventing pad lifting during wire bonding

Resistant to etchants and solvents used in PCB production

Can replace alumina substrates in many applications

5. PCB Stackup (2-Layer Rigid Structure)

Total thickness: 0.8mm (including copper layers)

7. Rogers TMM10i Material – Product Introduction

TMM thermoset microwave materials are ceramic, hydrocarbon, thermoset polymer composites designed for high plated-thru-hole reliability stripline and microstrip applications. TMM laminates are available in a wide range of dielectric constants and claddings.

The electrical and mechanical properties of TMM laminates combine many of the benefits of both ceramic and traditional PTFE microwave circuit laminates, without requiring the specialized production techniques common to these materials. TMM laminates do not require a sodium napthanate treatment prior to electroless plating.

TMM laminates are based on thermoset resins, and do not soften when heated. As a result, wire bonding of component leads to circuit traces can be performed without concerns of pad lifting or substrate deformation. TMM laminates combine many of the desirable features of ceramic substrates with the ease of soft substrate processing techniques.

9. TMM10i Typical Properties (Data Sheet)

Type of artwork supplied: Gerber RS-274-X

12. Standard Thicknesses, Panel Sizes & Claddings

应用领域

  • Dielectric Constant (Dk): 9.80 ± 0.245 at 10 GHz
  • Dissipation Factor: 0.0020 at 10 GHz
  • Thermal coefficient of Dk: -43 ppm/°K
  • CTE matched to copper (X/Y/Z): 19/19/20 ppm/K (0 to 140°C)
  • Decomposition Temperature (Td): 425 °C TGA
  • Thermal Conductivity: 0.76 W/m/K
  • Isotropic dielectric constant (Dk) for consistent performance
  • Mechanical properties resist creep and cold flow
  • Resistant to process chemicals, reducing damage during fabrication
  • Based on thermoset resin, allowing for reliable wire-bonding
  • Available in thickness range .0015" to .500" ± .0015"
Rogers TMM10i 2-Layer ENIG PCB
TMM10i Material

规格参数

Base materialRogers TMM10i (ceramic thermoset polymer composite)
Layer count2-layer rigid
Board dimensions104.8mm x 99.01mm = 1 PCS, ±0.15mm
Minimum Trace/Space6/9 mils
Minimum Hole Size0.4mm
Blind viasNo
Finished board thickness0.8mm (30mil core)
Finished Cu weight1 oz (35 μm / 1.4 mils) outer layers
Via plating thickness20 μm
表面处理ENIG
Top SilkscreenWhite
Bottom SilkscreenWhite
Top Solder MaskBlack
Bottom Solder MaskBlack
Edge platingYes
100% Electrical testUsed prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com