BICHENGPCBBicheng Technologies Limited

Rogers RO4533 2 层 0.6mm 沉金电路板 — 天线级应用

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

起订量
1PCS
交期
7-10 working days
包装
Vacuum / Anti-static Packaging
付款方式
T/T, Paypal

产品简介

Rogers RO4533 laminates are ceramic-filled, glass-reinforced hydrocarbon based material set, providing the controlled dielectric constant, low loss performance and excellent passive intermodulation response required for mobile infrastructure microstrip antenna applications.

RO4533 laminates are fully compatible with conventional FR-4 and high temperature lead-free solder processing. These laminates do not require special treatment needed on traditional PTFE-based laminates for plated through-hole preparation. It is an affordable alternative to more conventional PTFE antenna technologies, thus allowing designers to optimize the price and performance of their antennas. Moreover, RO4533 laminates are available halogen-free to meet the most stringent "green" standards.

The resin systems of RO4533 dielectric materials are designed to provide the necessary properties for ideal antenna performance. The coefficients of thermal expansion (CTEs) in both the X and Y directions are similar to that of copper. The good CTE match reduces stresses in the printed circuit board antenna. The typical glass transition temperature of RO4533 materials exceeds 280°C (536°F), leading to a low z-axis CTE and excellent plated through-hole reliability.

This 2-layer rigid PCB is constructed entirely with Rogers RO4533 as the core material, making it ideal for cellular infrastructure base station antennas and WiMAX antenna networks.

Dielectric constant of 3.3 at 10 GHz (±0.08)

Dissipation factor of 0.0020 at 2.5 GHz and 0.0025 at 10 GHz

X-axis CTE of 13 ppm/°C, Y-axis CTE of 11 ppm/°C, Z-axis CTE of 37 ppm/°C

Low PIM performance better than -157 dBc (typical)

Low loss, low Dk and low PIM response for wide range of application use

Thermoset resin system compatible with standard PCB fabrication (FR-4 processes)

Excellent dimensional stability for greater yield on larger panel sizes

Uniform mechanical properties for maintaining mechanical form during handling

High thermal conductivity for improved power handling

Good CTE match with copper reduces stresses in PCB antenna

Low z-axis CTE and excellent plated through-hole reliability

No special via preparation required (no sodium etch)

Affordable alternative to PTFE antenna technologies

4. Rogers RO4533 PCB Construction Details

5. PCB Stackup (2-Layer Rigid Structure)

Cellular infrastructure base station antennas

Mobile infrastructure microstrip antenna applications

Type of artwork supplied: Gerber RS-274-X

9. Rogers RO4533 Antenna Grade Laminate – Product Introduction

RO4500 Series High Frequency Laminates are cost/performance materials from Rogers Corporation, specifically engineered and manufactured to meet the specific demands of the antenna markets. RO4533 laminates extend the capabilities of the successful RO4000 product series into antenna applications. This ceramic-filled, glass-reinforced hydrocarbon based material set provides the controlled dielectric constant, low loss performance and excellent passive intermodulation response required for mobile infrastructure microstrip antenna applications.

As with all RO4000 high frequency laminates, RO4500 laminates are fully compatible with conventional FR-4 and high temperature lead-free solder processing. These laminates do not require special treatment needed on traditional PTFE-based laminates for plated through-hole preparation. This product series is an affordable alternative to more conventional PTFE antenna technologies, thus allowing designers to optimize the price and performance of their antennas. Moreover, RO4533 laminates are available halogen-free to meet the most stringent "green" standards.

The resin systems of RO4500 dielectric materials are designed to provide the necessary properties for ideal antenna performance. The coefficients of thermal expansion (CTEs) in both the X and Y directions are similar to that of copper. The good CTE match reduces stresses in the printed circuit board antenna. The typical glass transition temperature of RO4500 materials exceeds 280°C (536°F), leading to a low z-axis CTE and excellent plated through-hole reliability. These properties, in combination with a dimensional stability value of less than 0.05%, make RO4500 laminates an excellent candidate for printed circuit antenna applications. RO4500 materials also provide increased thermal conductivity over equivalent PTFE/woven glass materials, allowing for design of antennas with increased power handling capability.

In addition to these excellent thermo-mechanical properties, RO4500 laminates embody electrical characteristics that antenna designers need. The laminates have a dielectric constant (Dk) ranging from 3.3 to 3.5 (±0.08) and a loss tangent (Df) of 0.0020 to 0.0037 measured at 2.5 GHz. These values allow antenna designers to realize substantial gain values while minimizing signal loss. Materials are available with demonstrated low PIM performance, with values better than -155 dBc using two 43 dBm swept tones at 1900 MHz.

13. Standard Thicknesses, Panel Sizes & Claddings

Electrodeposited Copper Foil: ½ oz (18 μm), 1 oz (35 μm)

RO4533 PCB 20mil 2-layer Immersion gold
CCL 76 RO4533

规格参数

Base materialRogers RO4533
Layer count2 layers
Board dimensions123.5mm x 46mm = 1 PCS, +/- 0.15mm
Minimum Trace/Space4/5 mils
Minimum Hole Size0.25mm
Blind viasNo
Finished board thickness0.6mm
Finished Cu weight1 oz (1.4 mils) outer layers
Via plating thickness20 μm
表面处理Immersion Gold
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskGreen
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com