BICHENGPCBBicheng Technologies Limited

Rogers RO4533 2 层 30mil 射频天线电路板,ENEPIG 表面处理

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

Rogers RO4533 laminates are ceramic-filled, glass-reinforced hydrocarbon based material set, providing the controlled dielectric constant, low loss performance and excellent passive intermodulation response required for mobile infrastructure microstrip antenna applications.

RO4533 laminates are fully compatible with conventional FR-4 and high temperature lead-free solder processing. These laminates do not require special treatment needed on traditional PTFE-based laminates for plated through-hole preparation. It is an affordable alternative to more conventional PTFE antenna technologies, thus allowing designers to optimize the price and performance of their antennas. Moreover, RO4533 laminates are available halogen-free to meet the most stringent “green” standards.

The resin systems of RO4533 dielectric materials are designed to provide the necessary properties for ideal antenna performance. The coefficients of thermal expansion (CTEs) in both the X and Y directions are similar to that of copper. The good CTE match reduces stresses in the printed circuit board antenna. The typical glass transition temperature of RO4533 materials exceeds 280°C (536°F), leading to a low z-axis CTE and excellent plated through-hole reliability.

Dielectric Constant of DK 3.3 at 10GHz Dissipation Factor of 0.0025 at 10GHz X axis CTE of 13ppm/°C, Y CTE of 11ppm/°C, Z CTE of 37ppm/°C Tg >280 °C Low moisture absorption of 0.02% Thermal conductivity of 0.6 W/mk

Low Loss, Low Dk and low PIM response for wide range of application use Thermoset resin system compatible with standard PCB fabrication Excellent dimensional stability for greater yield on larger panels sizes Uniform mechanical properties for maintaining mechanical form during handling High thermal conductivity for improved power handling

Copper layer 1 – 35 µm Rogers RO4533 Core – 0.762 mm (30mil) Copper layer 2 – 35 µm

Components: 20 Total Pads: 46 Thru Hole Pads: 22 Top SMT Pads: 24 Bottom SMT Pads: 0 Vias: 19 Nets: 3

Cellular infrastructure base station antennas WiMAX antenna networks

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

Rogers RO4533 RF Antenna PCB

规格参数

Base MaterialRO4533
Layer Count2 layers
Board Dimensions46.95mm × 53.13mm (±0.15mm)
Minimum Trace/Space4/5 mils
Minimum Hole Size0.4mm
Blind ViasNo
Finished Board Thickness0.8mm
Finished Cu Weight (Outer Layers)1oz (1.4 mils)
Via Plating Thickness20 µm
表面处理ENEPIG (Electroless Nickel Electroless Palladium and Immersion Gold)
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskGreen
Bottom Solder MaskNo
Electrical Test100% prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com