Rogers RO4350B FR-4 8 层 1.553mm 高频射频微波电路板 沉金
定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。
产品简介
1.Introduction to RO4350B + FR-4 8-Layer Hybrid PCB
This 8-layer rigid hybrid PCB is constructed with Rogers RO4350B on the top and bottom layers and FR-4 Tg180 in the middle. RO4350B hydrocarbon ceramic laminates are designed to offer superior high frequency performance and low cost circuit fabrication. The result is a low loss material which can be fabricated using standard epoxy/glass (FR-4) processes offered at competitive prices. RO4350B material possesses the properties needed by designers of RF microwave circuits, matching networks, and controlled impedance transmission lines. The board features ENIG surface finish, green solder mask, white silkscreen, 25μm via plating thickness, IPC-Class-3 quality standard, metal cladding, blind vias from layer 1 to layer 2, buried vias from layer 5 to layer 6, and resin plugged vias. The finished board thickness is 1.553mm with board dimensions of 120mm x 30mm.
Dielectric constant (process): 3.48 ±0.05 at 10 GHz / 23°C Dielectric constant (design): 3.66 at 8 to 40 GHz Dissipation factor: 0.0037 at 10 GHz / 23°C, 0.0031 at 2.5 GHz / 23°C Thermal coefficient of Dk: +50 ppm/°C (-50 to 150°C) Volume resistivity: 1.2 x 10¹⁰ MΩ·cm (COND A) Surface resistivity: 5.7 x 10⁹ MΩ (COND A) Electrical strength: 31.2 KV/mm (780 V/mil) at 0.51mm Tensile modulus X: 16,767 MPa (2,432 ksi) at RT Tensile modulus Y: 14,153 MPa (2,053 ksi) at RT Tensile strength X: 203 MPa (29.5 ksi) at RT Tensile strength Y: 130 MPa (18.9 ksi) at RT Flexural strength: 255 MPa (37 kpsi) Dimensional stability: <0.5 mm/m after etch + E2/150°C CTE X-axis: 10 ppm/°C (-55 to 288°C) CTE Y-axis: 12 ppm/°C (-55 to 288°C) CTE Z-axis: 32 ppm/°C (-55 to 288°C) Tg: >280°C (TMA method) Td: 390°C (TGA method) Thermal conductivity: 0.69 W/m/°K at 80°C Moisture absorption: 0.06% (48 hrs immersion, 50°C, 0.060" sample) Density: 1.86 g/cm³ at 23°C Copper peel strength: 0.88 N/mm (5.0 pli) after solder float, 1 oz EDC foil Flammability rating: UL 94 V-0 Lead-free process compatible: Yes
RO4350B hydrocarbon ceramic provides low dielectric loss for high frequency performance FR-4 process compatible with standard epoxy/glass fabrication techniques No specialized via preparation such as sodium etch required CTE matched to copper for excellent dimensional stability Low Z-axis CTE (32 ppm/°C) provides reliable plated through-hole quality even in severe thermal shock applications Tg >280°C ensures stable expansion characteristics over entire circuit processing temperature range Low moisture absorption (0.06%) for consistent electrical performance High thermal conductivity (0.69 W/m/°K) for efficient heat dissipation ENIG surface finish provides excellent solderability and corrosion resistance IPC-Class-3 quality for high-reliability applications Metal cladding for enhanced thermal management and EMI shielding Blind vias (L1-L2) and buried vias (L5-L6) enable higher density routing Resin plugged vias for improved reliability
4.RO4350B + FR-4 8-Layer Hybrid PCB Construction Details
L1 Copper: 0.035 mm Core RO4350B: 0.254 mm Copper: 0.035 mm Prepreg 106 Tg180°C (RC75%) x 1 Prepreg 106 Tg180°C (RC75%) x 1 L2 Copper Prepreg 106 Tg180°C (RC75%) x 1 Prepreg 106 Tg180°C (RC75%) x 1 L3 Copper Core FR-4 L4 Copper Prepreg 1080 Tg180°C (RC66%) x 1 Prepreg 1080 Tg180°C (RC66%) x 1 L5 Copper Core FR-4 L6 Copper Prepreg 106 Tg180°C (RC75%) x 1 Prepreg 106 Tg180°C (RC75%) x 1 L7 Copper Core RO4350B L8 Copper
Cellular base station antennas and power amplifiers Automotive radar and sensors RF identification tags LNBs for direct broadcast satellites Microstrip and stripline circuits Millimeter wave applications Point to point digital radio antennas Broadband applications
Type of artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-3 Availability: Worldwide
8.RO4350B High-Frequency Laminate – Product Introduction
RO4000 hydrocarbon ceramic laminates are designed to offer superior high frequency performance and low cost circuit fabrication. The result is a low loss material which can be fabricated using standard epoxy/glass (FR-4) processes offered at competitive prices. RO4350B laminates utilize RoHS compliant flame-retardant technology for applications requiring UL 94V-0 certification. RO4000 material possesses the properties needed by designers of RF microwave circuits, matching networks, and controlled impedance transmission lines. Low dielectric loss allows RO4000 series material to be used in many applications where higher operating frequencies limit the use of conventional circuit board laminates. The temperature coefficient of dielectric constant is among the lowest of any circuit board material, and the dielectric constant is stable over a broad frequency range, making it an ideal substrate for broadband applications. RO4000 material's thermal coefficient of expansion (CTE) is similar to that of copper which allows the material to exhibit excellent dimensional stability, a property needed for mixed dielectric multi-layer boards constructions. The low Z-axis CTE of RO4000 laminates provides reliable plated through-hole quality, even in severe thermal shock applications. RO4000 series material has a Tg of >280°C (536°F) so its expansion characteristics remain stable over the entire range of circuit processing temperatures. RO4000 series laminates can easily be fabricated into printed circuit boards using standard FR-4 circuit board processing techniques. Unlike PTFE based high performance materials, RO4000 series laminates do not require specialized via preparation processes such as sodium etch.
Benefits: Low dielectric loss allows higher operating frequencies FR-4 process compatible with standard epoxy/glass fabrication No specialized via preparation (no sodium etch required) CTE matched to copper for excellent dimensional stability Low Z-axis CTE for reliable plated through-hole quality Tg >280°C for stable expansion characteristics UL 94 V-0 certified for flame retardancy RoHS compliant
10.RO4350B Data Sheet (Electrical & Mechanical)
Cellular base station antennas and power amplifiersAutomotive radar and sensorsRF identification tagsLNBs for direct broadcast satellitesMicrostrip and stripline circuitsMillimeter wave applicationsPoint to point digital radio antennasBroadband applications
Blind Vias: Blind vias connect an outer layer to one or more inner layers but do not go through the entire board thickness. In this product, blind vias are used from layer 1 to layer 2 (L1-L2). Blind vias save space on outer layers and improve signal integrity by reducing stub effects.
Buried Vias: Buried vias are located entirely within the inner layers and are not visible from the outer surfaces. In this product, buried vias are used from layer 5 to layer 6 (L5-L6). Buried vias allow for higher routing density and free up space on outer layers for component placement.
Resin Plug: Resin plug is a process where vias are filled with resin to create a flat surface for stacking or component placement, improving reliability and preventing solder wicking.
Metal Cladding: Metal cladding provides EMI shielding, improved thermal dissipation, and enhanced mechanical robustness at the board edges.
Storage: Fully clad RO4350B laminates should be stored at room temperature between 50-90°F (10-32°C).
Inner Layer Preparation: RO4350B materials are compatible with most liquid and dry film photo-resists and can be processed through develop, etch, and strip (DES) systems.
Multi-Layer Bonding: RO4350B laminates are compatible with many thermosetting and thermoplastic adhesive systems.
Drilling: Standard entry/exit materials, drilling speeds greater than 500 SFM should be avoided. Hole wall roughness 8-25 μm.
PTH Processing: Desmear typically not required; RO4350B does not require special treatments prior to metallization.
Final Metal Finishes: Compatible with OSPs, HASL, ENIG, etc.
