BICHENGPCBBicheng Technologies Limited

面向射频应用的 Rogers RO4350B 2 层 1.524mm 沉银电路板

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

Rogers RO4350B materials are proprietary woven glass reinforced hydrocarbon/ceramics with electrical performance close to PTFE/woven glass and the manufacturability of epoxy/ glass.

RO4350B laminates provide tight control on dielectric constant (Dk) and maintain low loss while utilizing the same processing method as standard epoxy/glass. Available at a fraction of the cost of conventional microwave laminates, RO4350B laminates do not require the special through-hole treatments or handling procedures as PTFE based materials. These materials are UL 94 V-0 rated for active devices and high power RF designs.

Stable Dielectric Constant: 3.48 ±0.05 at 10GHz/23°C Low Loss Performance: Dissipation Factor of 0.0037 at 10GHz/23°C Temperature Stability: Thermal Coefficient of DK +50 ppm/°C ranging -50°C to 150°C Thermal Management: Thermal Conductivity of 0.69 W/m/°K Dimensional Stability: X axis CTE 10 ppm/°C, Y CTE 12 ppm/°C, Z CTE 32 ppm/°C High Temperature Resistance: High Tg value of >280°C Environmental Durability: Low water absorption of 0.06% Safety Certified: UL 94-V0 Flammability

Copper Layer 1 - 35 μm Rogers RO4350B Core - 1.524 mm (60mil) Copper Layer 2 - 35 μm

Components: 27 Total Pads: 108 Thru Hole Pads: 72 Top SMT Pads: 36 Bottom SMT Pads: 0 Vias: 101 Nets: 2

Cellular Base Station Antennas and Power Amplifiers RF Identification Tags Automotive Radar and Sensors LNB's for Direct Broadcast Satellites

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

Rogers RO4350B PCB

规格参数

Base MaterialRO4350B
Layer Count2-layer
Board Dimensions54mm × 68mm = 1PC, ±0.15mm
Minimum Trace/Space4/6 mils
Minimum Hole Size0.3mm
Blind ViasNo
Finished Board Thickness1.6mm
Finished Cu Weight1oz (1.4 mils)
Via Plating Thickness20 μm
表面处理Immersion Silver
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskBlue
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com