Rogers DiClad 527 2 层 0.6mm 沉金电路板 — 雷达与相控阵系统
定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。
- 起订量
- 1PCS
- 交期
- 7-10 working days
- 包装
- Vacuum / Anti-static Packaging
- 付款方式
- T/T, Paypal
产品简介
1. Introduction to Rogers DiClad 527 PCB
Rogers DiClad 527 laminates are woven fiberglass reinforced, PTFE-based composite materials for use as printed circuit board substrates. They offer a higher ratio of fiberglass reinforcement to PTFE content. This carefully controlled ratio provides a higher dielectric constant (Dk) range and better dimensional stability and registration. This 2-layer rigid PCB is constructed entirely with DiClad 527 as the core material, making it ideal for demanding microwave, radar, and phased array applications.
DiClad 527 laminates exhibit extremely low loss tangent, consistent mechanical performance, and stable electrical properties over a wide frequency range — critical for high-frequency, high-reliability applications. The material shows negligible performance drift caused by high humidity environments and excellent chemical resistance, making it suitable for both indoor and outdoor harsh environments.
2. Key Features of Rogers DiClad 527 PCB
Dk range of 2.4 to 2.6 at 10 GHz and 1 MHz, 50% RH
Dissipation factor of 0.0017 at 10 GHz, 0.0010 at 1MHz, 50% RH
TcDK of -153 ppm/°C ranging -10~140°C, 10 GHz
CTE in X-axis: 14 ppm/°C, Y-axis: 21 ppm/°C, Z-axis: 173 ppm/°C
Excellent dimensional stability and registration
Negligible performance drift caused by high humidity environments
Extremely Low Loss Tangent for high-frequency & high-power designs
Excellent Dimensional Stability ensuring multi-layer registration accuracy
Product Performance Uniformity and batch-to-batch consistency
Electrical Properties Highly Uniform Across Frequency
Consistent Mechanical Performance under thermal cycling
Excellent Chemical Resistance for aggressive fabrication environments
Stable Dk over wide frequency range ensures predictable impedance control
Low circuit losses at high frequency enhance system efficiency
Negligible performance drift caused by high humidity environments — ideal for outdoor and shipboard equipment
5. PCB Stackup (2-Layer Rigid Structure)
7. Rogers DiClad 527 Material – Product Introduction
Rogers DiClad 527 laminates are woven fiberglass reinforced, PTFE-based composite materials for use as printed circuit board substrates. They offer a higher ratio of fiberglass reinforcement to PTFE content. This carefully controlled ratio provides a higher dielectric constant (Dk) range and better dimensional stability and registration. The material is well known for extremely low loss tangent, consistent mechanical performance, and stable electrical properties over a wide frequency range — critical for high-frequency, high-reliability applications.
DiClad 527 exhibits negligible performance drift caused by high humidity environments and excellent chemical resistance, making it suitable for both indoor and outdoor harsh environments. The combination of low moisture absorption (0.03%) and stable Dk over temperature ensures reliable operation in aerospace, defense, and telecommunication infrastructure.
9. DiClad 527 Typical Properties (Data Sheet)
Type of artwork supplied: Gerber RS-274-X
12. Standard Thicknesses, Panel Sizes & Claddings
13. Dk Stability & Frequency Performance
DiClad 527 maintains a stable dielectric constant over a broad frequency range (1 MHz to 10 GHz) with minimal variation, ensuring predictable impedance control for high-frequency circuits. The typical Dk at 10 GHz is between 2.4 and 2.6, and the material shows exceptionally low sensitivity to humidity and temperature changes.
应用领域
- Dk range of 2.4 to 2.6 at 10 GHz and 1 MHz, 50% RH
- Dissipation factor of 0.0017 at 10 GHz, 0.0010 at 1MHz, 50% RH
- TcDK of -153 ppm/°C ranging -10~140°C, 10 GHz
- Low Moisture Absorption: 0.03%
- CTE in X-axis: 14 ppm/°C, Y-axis: 21 ppm/°C, Z-axis: 173 ppm/°C
- Excellent dimensional stability and registration
- Stable Dk over wide frequency range
- Low circuit losses at high frequency
- Negligible performance drift caused by high humidity environments
- Excellent chemical resistance
规格参数
层叠结构
- Copper_layer_1 (Top) · Copper · 35 μm (1 oz)copper
- Core · DiClad 527 · 0.508 mm (20 mil)core
- Copper_layer_2 (Bottom) · Copper · 35 μm (1 oz)copper
