BICHENGPCBBicheng Technologies Limited

RO4350B 与 S1000-2M 高性能电路板设计 — 适用于射频、雷达与毫米波应用

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

Rogers RO4350B materials are proprietary woven glass-reinforced hydrocarbon/ceramics that offer electrical performance comparable to PTFE/woven glass while maintaining the manufacturability of epoxy/glass. RO4350B laminates provide precise control over dielectric constant (Dk) and low loss, utilizing standard epoxy/glass processing methods. They are cost-effective compared to conventional microwave laminates and do not require special handling procedures. These materials are UL 94 V-0 rated, suitable for high power RF designs.

The thermal coefficient of expansion (CTE) of RO4350B is similar to copper, ensuring excellent dimensional stability crucial for mixed dielectric multi-layer board constructions. The low Z-axis CTE guarantees reliable plated through-hole quality, even under severe thermal shock. The material has a Tg of >280°C (536°F), ensuring stable expansion characteristics throughout circuit processing temperatures.

Dielectric Constant of DK 3.48 ±0.05 at 10GHz/23°C Dissipation Factor of 0.0037 at 10GHz/23°C Thermal Conductivity: 0.69 W/m/°KB X-axis CTE: 10 ppm/°C, Y-axis CTE: 12 ppm/°C, Z-axis CTE: 32 ppm/°C High Tg value of >280°C Low water absorption: 0.06%

Lower Z-axis CTE for improved through-hole reliability Excellent mechanical processability and thermal resistance Lead-free compatible Tg180°C (DSC), UV blocking/AOI compatible High heat resistance Excellent anti-CAF performance Low water absorption

Components: 33Total Pads: 242Thru Hole Pads: 125Top SMT Pads: 117Bottom SMT Pads: 0Vias: 49Nets: 3

Artwork Format: Gerber RS-274-XQuality Standard: IPC-Class-2 compliantAvailability: Worldwide production and shipping

Commercial airline broadband antennasMicrostrip and stripline circuitsMillimeter wave applicationsRadar systemsGuidance systemsPoint-to-point digital radio antennas

Hybrid PCB 10mil RO4350B and S1000-2M 4-layer 1.6mm Thick

规格参数

Copper Layer 135 µm
RO4350B0.254 mm (10 mil)
Copper Layer 235 µm
Prepreg1080 RC63% 0.0644 mm (2.5 mil)
Copper Layer 335 µm
S1000-2M1.1 mm (43 mil)
Copper Layer 435 µm

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com