BICHENGPCBBicheng Technologies Limited

基于 RO4003C 与 S1000-2M 的混合电路板 6 层 1.1mm 厚低损耗材料,适用于微带与带状线电路

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

Rogers RO4003C materials are proprietary woven glass-reinforced hydrocarbon/ceramics, combining the electrical performance of PTFE/woven glass with the manufacturability of epoxy/glass. This design aims to deliver superior high-frequency performance while maintaining cost-effective circuit fabrication. Consequently, RO4003C is a low-loss material that can be processed using standard epoxy/glass (FR-4) techniques at competitive prices.

RO4003C possesses essential properties for RF microwave circuit designers, matching networks, and controlled impedance transmission lines. Its low dielectric loss makes it suitable for applications where higher operating frequencies restrict the use of conventional circuit board laminates.

Available in various configurations, RO4003C laminates utilize both 1080 and 1674 glass fabric styles, all meeting the same laminate electrical performance specifications. Notably, RO4003C materials are non-brominated and are not rated UL 94 V-0.

Dielectric Constant: DK 3.38 ± 0.05 at 10GHz Dissipation Factor: 0.0027 at 10GHz Thermal Conductivity: 0.71 W/m/°K Thermal Coefficient of Dielectric Constant: +40 ppm/°C (ranging from -50°C to 150°C) Coefficient of Thermal Expansion (CTE) matched to copper: X-axis 11 ppm/°C, Y-axis 14 ppm/°C Low Z-axis CTE: 46 ppm/°C Glass Transition Temperature (Tg): >280 °C Low Moisture Absorption: 0.06%

Lower Z-axis CTE for improved through-hole reliability Excellent mechanical processability and thermal resistance Lead-free compatible Tg: 180°C (DSC), compatible with UV blocking/AOI High heat resistance Excellent anti-CAF performance Low water absorption

Copper Layer 1: 35 µmRO4003C: 0.305 mm (12 mil)Copper Layer 2: 35 µmPrepreg: 1080 RC63% 0.0644 mm (2.5 mil)Copper Layer 3: 35 µmS1000-2M: 0.203 mm (3 mil)Copper Layer 4: 35 µmPrepreg: 1080 RC63% 0.0644 mm (2.5 mil)Copper Layer 5: 35 µmRO4003C: 0.305 mm (12 mil)Copper Layer 6: 35 µm

Components: 22Total Pads: 39Through Hole Pads: 21Top SMT Pads: 18Bottom SMT Pads: 0Vias: 21Nets: 5

Commercial Airline Broadband AntennasMicrostrip and Stripline CircuitsMillimeter Wave ApplicationsRadar SystemsGuidance SystemsPoint-to-Point Digital Radio Antennas

Hybrid PCB 6-layer RO4003C S1000-2M

规格参数

PCB Construction DetailsParameters
Board Dimensions62.5 mm x 57.8 mm = 1 PCS, ± 0.15 mm
Minimum Trace/Space4/7 mils
Minimum Hole Size0.3 mm
Blind ViasNone
Finished Board Thickness1.1 mm
Finished Copper Weight1 oz (1.4 mils) for inner/outer layers
Via Plating Thickness20 µm
表面处理Immersion Silver
Top SilkscreenWhite
Bottom SilkscreenNone
Top Solder MaskMatte Blue
Bottom Solder MaskMatte Blue
Impedance Control4 mil / 7 mil traces/gaps on the top layer, 90 ohm
Print Series NumberYes
Via Filling and Capping0.3 mm vias are filled and capped
Electrical Testing100% Electrical Testing conducted prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com