BICHENGPCBBicheng Technologies Limited

F4BTMS615 高频电路板 — 2 层刚性电路板,HASL 表面处理

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

The F4BTMS series represents an advanced iteration of the F4BTM series, featuring significant innovations in material formulation and manufacturing techniques. This upgraded material incorporates a substantial amount of ceramics and is reinforced with ultra-thin, ultra-fine glass fiber cloth. These enhancements lead to marked improvements in performance and a wider range of dielectric constants, making it a high-reliability option for aerospace applications, capable of replacing similar foreign products.

By integrating a small quantity of ultra-thin glass fiber cloth with a large amount of uniformly distributed special nano-ceramics mixed with polytetrafluoroethylene resin, the adverse effects of glass fiber on electromagnetic wave propagation are minimized. This approach reduces dielectric loss, enhances dimensional stability, and decreases the anisotropy in the X/Y/Z directions. It also expands the usable frequency range, improves electrical strength, and boosts thermal conductivity. Furthermore, the material features a low thermal expansion coefficient and stable dielectric temperature characteristics.

The F4BTMS series includes RTF low roughness copper foil as a standard feature, which reduces conductor loss and provides excellent peel strength. It is compatible with both copper and aluminum bases.

Dielectric constant (Dk) of 6.15 at 10 GHz Dissipation factor of 0.0020 at 10 GHz and 0.0023 at 20 GHz Coefficient of Thermal Expansion (CTE): 10 ppm/°C in the X-axis, 12 ppm/°C in the Y-axis, 40 ppm/°C in the Z-axis, over a range of -55°C to 288°C Low thermal coefficient of Dk at -96 ppm/°C, from -55°C to 150°C High thermal conductivity of 0.67 W/mK Moisture absorption rate of 0.1%

3. PCB Stackup: 2-layer rigid PCB The stackup consists of: Copper Layer 1: 35 µm F4BTMS615 Core: 5.08 mm (200 mil) Copper Layer 2: 35 µm

4. PCB Construction Details Board dimensions: 92.32 mm x 31.5 mm (1 piece), with a tolerance of ±0.15 mm Minimum trace/space: 5/5 mils Minimum hole size: 0.5 mm No blind vias are present. Finished board thickness: 5.2 mm Finished copper weight: 1 oz (1.4 mils) for outer layers Via plating thickness: 20 µm Surface finish: Hot Air Soldering Level (HASL) Top silkscreen: None Bottom silkscreen: None Top solder mask: None Bottom solder mask: None 100% electrical testing conducted prior to shipment

5. PCB Statistics Total components: 20- Total pads: 35 Through-hole pads: 21 Top SMT pads: 14 Bottom SMT pads: 0 Vias: 37 Nets: 2

6. Type of Artwork SuppliedGerber RS-274-X

9. Typical Applications Aerospace equipment, including space and cabin systems Microwave and RF applications Radar and military radar systems Feed networks Phase-sensitive antennas and phased array antennas Satellite communications and more.

F4BTMS615 PCB

规格参数

Coefficient of Thermal Expansion (CTE)10 ppm/°C in the X-axis, 12 ppm/°C in the Y-axis, 40 ppm/°C in the Z-axis, over a range of -55°C to 288°C
Copper Layer 135 µm
F4BTMS615 Core5.08 mm (200 mil)
Copper Layer 235 µm
Board dimensions92.32 mm x 31.5 mm (1 piece), with a tolerance of ±0.15 mm
Minimum trace/space5/5 mils
Minimum hole size0.5 mm
Finished board thickness5.2 mm
Finished copper weight1 oz (1.4 mils) for outer layers
Via plating thickness20 µm
表面处理Hot Air Soldering Level (HASL)
Top silkscreenNone
Bottom silkscreenNone
Top solder maskNone
Bottom solder maskNone
Total components20
Through-hole pads21
Top SMT pads14
Bottom SMT pads0
Vias37
Nets2

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com