BICHENGPCBBicheng Technologies Limited

面向射频应用的 6 层混合电路板,采用 RO4350B 与高 Tg FR-4

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

1.Product Introduction: Advanced Hybrid PCB Technology

This innovative 6-layer hybrid PCB combines Rogers RO4350B high-frequency material with standard High Tg FR-4 (Tg170°C) in an optimized stackup, delivering superior RF performance while maintaining cost efficiency. The hybrid construction strategically places RO4350B (Dk=3.48±0.05) in critical signal layers for optimal high-frequency response, while utilizing cost-effective FR-4 for structural support and power distribution. This approach provides the perfect balance between RF performance, thermal reliability, and manufacturing economics for modern wireless systems.

Dielectric Constant: 3.48±0.05 @10GHz Ultra-Low Loss: 0.0037 dissipation factor @10GHz Thermal Stability: 32 ppm/°C Z-axis CTE Process Compatibility: Standard FR-4 fabrication Flame Rating: UL 94 V-0 certified

High Temp Resistance: Tg≥170°C Mechanical Strength: Excellent multilayer compatibility Cost Efficiency: Traditional epoxy/fiberglass benefits Lead-Free Compatible: Withstands high-temp soldering

Copper layer 1 - 35 μm RO4350B - 0.422 mm (16.6mil) Copper layer 2 - 35 μm Prepreg - 0.102mm Copper layer 3 - 35 μm Tg170°C FR-4 - 0.254mm Copper layer 4 - 35 μm PrePreg - 0.002mm Copper layer 5 - 35 μm Tg170°C FR-4 - 0.508mm Copper layer 6 - 35 μm

Components: 77 Total Pads: 276 Thru Hole Pads: 178 Top SMT Pads: 86 Bottom SMT Pads: 12 Vias: 213 Nets: 11

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class 2 Availability: Worldwide shipping

Performance Optimization: RO4350B for critical RF paths, FR-4 for power/cost Thermal Reliability: Withstands lead-free reflow processes Impedance Control: ±0.05 Dk tolerance in RF sections Manufacturing Efficiency: Standard FR-4 processes throughout

Cellular Base Station Antennas and Power Amplifiers RF Identification Tags Automotive Radar and Sensors LNB's for Direct Broadcast Satellites

规格参数

Base MaterialRO4350B / Tg170 FR-4
Layer Count6-Layer
Board Dimensions155mm × 120mm (±0.15mm)
Minimum Trace/Space4/6 mils
Minimum Hole Size0.4mm
Via TypeThrough-Hole Only
Finished Thickness1.6mm
Copper Weight1oz (35μm) outer layers
Via Plating Thickness20μm
表面处理Immersion Silver
Top SilkscreenWhite
Bottom SilkscreenNone
Top Solder MaskGreen
Bottom Solder MaskGreen
Electrical Testing100% tested prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com