BICHENGPCBBicheng Technologies Limited

14 层 Megtron-6 ENEPIG 电路板 — 高速低损耗多层板

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

起订量
1PCS
交期
10-15 working days
包装
Vacuum / Anti-static Packaging
付款方式
T/T, Paypal

产品简介

The MEGTRON 6 Family, including MEGTRON 6(G), MEGTRON 6(K), MEGTRON 6(N), are the original PCB industry standards. The products are ideal for mobile, networking, and wireless applications requiring high-speed, ultra-low loss circuit materials. MEGTRON 6 provides excellent high-density interconnect (HDI) and thermal performance.

Megtron-6 laminates feature low dielectric constant (Dk) glass cloth and ultra-low loss characteristics, making them perfect for high-speed digital and RF applications. This 14-layer rigid PCB is constructed with R-5775 laminate and R-5670 prepreg, offering exceptional signal integrity and thermal reliability.

Ultra-low loss, highly heat resistant circuit board material

Low Dielectric Constant (Dk) Glass Cloth – Laminate R-5775 / Prepreg R-5670

Dielectric Constant (Dk): 3.4 @ 1GHz / 3.4 @ 12GHz

Dissipation Factor (Df): 0.002 @ 1GHz / 0.004 @ 12GHz

Glass Transition Temperature (Tg): 185°C (DSC) / 210°C (DMA)

CTE (X/Y): 14-16 ppm/°C; CTE (Z): 45 ppm/°C (α1), 260 ppm/°C (α2)

Volume Resistivity: 1×10⁹ MΩ·cm; Surface Resistivity: 1×10⁸ MΩ

Ultra-low loss enables high-speed signal transmission with minimal attenuation

Low Dk and Df ensure excellent high-frequency performance up to 58GHz

High Tg (185°C) and Td (410°C) provide outstanding thermal reliability

Low CTE matched to copper for excellent plated through-hole reliability

Resin plugged vias (IPC-4761 TYPE VII) enhance reliability and prevent solder wicking

ENEPIG finish offers excellent solderability and wire bondability

Ideal for HDI designs with fine lines and spaces

Excellent dimensional stability and low warpage

5. PCB Stackup (14-Layer Rigid Structure)

Total thickness: 1.64mm (including copper layers)

7. Megtron-6 Material – Product Introduction

Ultra-low Loss, Highly Heat Resistant Circuit Board Materials. Low Dielectric Constant (Dk) Glass Cloth – Laminate R-5775 / Prepreg R-5670. The MEGTRON 6 Family, including MEGTRON 6(G), MEGTRON 6(K), MEGTRON 6(N), are the original PCB industry standards. The products are ideal for mobile, networking, and wireless applications requiring high-speed, ultra-low loss circuit materials. MEGTRON 6 provides excellent high-density interconnect (HDI) and thermal performance.

9. Megtron-6 (R-5775/R-5670) Typical Properties

High-speed networking equipment (routers, switches, servers)

Wireless infrastructure (5G base stations, antennas)

Automotive radar and advanced driver assistance systems (ADAS)

Data center and cloud computing hardware

Type of artwork supplied: Gerber RS-274-X

Resin Plugged Vias per IPC-4761 TYPE VII

应用领域

  • Ultra-low loss, highly heat resistant circuit board material
  • Low Dielectric Constant (Dk) Glass Cloth – Laminate R-5775 / Prepreg R-5670
  • Dielectric Constant (Dk): 3.4 @ 1GHz / 3.4 @ 12GHz
  • Dissipation Factor (Df): 0.002 @ 1GHz / 0.004 @ 12GHz
  • Glass Transition Temperature (Tg): 185°C (DSC) / 210°C (DMA)
  • Thermal Decomposition (Td): 410°C
  • CTE (X/Y): 14-16 ppm/°C; CTE (Z): 45 ppm/°C (α1), 260 ppm/°C (α2)
  • Thermal Conductivity: 0.42 W/m·K
  • Volume Resistivity: 1×10⁹ MΩ·cm; Surface Resistivity: 1×10⁸ MΩ
  • Water Absorption: 0.14%
  • Flammability: 94V-0
  • Resin Plugged Vias (IPC-4761 TYPE VII)
14-Layer Megtron-6 ENEPIG PCB
Megtron-6 stack up
Megtron-6 Material

规格参数

Base materialMegtron-6 (R-5775 Laminate / R-5670 Prepreg)
Layer count14-layer rigid
Board dimensions178.8mm x 169mm = 4PCS (2×2 array), ±0.15mm
Edge rails5mm on each side (panelization)
Minimum Trace/Space4/4 mils
Minimum Hole Size0.2mm
Blind viasNo
Finished board thickness1.64mm
Finished Cu weightInner: 0.5 oz (18μm) / Outer: 1 oz (35μm)
Via plating thickness20 μm
表面处理ENEPIG (Nickel-Palladium-Gold)
Top SilkscreenWhite
Bottom SilkscreenWhite
Top Solder MaskGreen
Bottom Solder MaskGreen
Resin Plugged ViasIPC-4761 TYPE VII
Quality standardIPC-3
100% Electrical testUsed prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com