BICHENGPCBBicheng Technologies Limited

18 层 M6 高速电路板,沉金表面处理

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

S1000-2M is a high-performance copper-clad laminate (CCL) from Shengyi Technology, specifically designed for high-layer-count and high-reliability PCB applications.

1.Ultra-Low Dielectric Constant and Loss Tangent: At 10GHz, typical Dk is approximately 3.4-3.6, with Df as low as below 0.002, significantly reducing signal attenuation and distortion. 2.Excellent Signal Integrity: Minimal signal loss ensures integrity over long-distance, high-speed transmissions, supporting extended trace lengths or higher data rates. 3.High Thermal Reliability: Glass transition temperature (Tg) exceeds 185°C with high decomposition temperature (Td), capable of withstanding lead-free soldering processes and ensuring dimensional stability and long-term reliability in demanding environments. 4.Stable Electrical Performance: Dielectric properties remain highly stable across wide frequency and temperature ranges, facilitating precise impedance control. 5.Suitable for High-Layer-Count, Complex Structures: Compatible with prepregs like R-5670G, ideal for manufacturing complex multilayer boards with 18 or more layers, meeting the needs of high-end servers, switches, and optical modules.

A High-Speed PCB is specifically designed and manufactured for transmitting high-speed digital signals. The "high-speed" characteristic refers not only to high clock frequencies but, more critically, to extremely short signal rise/fall times (typically less than 1 nanosecond), which cause signals to exhibit significant transmission line effects.

Core Challenges and Requirements in High-Speed PCB Design:

1.Impedance Control: Precise control of characteristic impedance (e.g., 50Ω single-ended, 100Ω differential) is essential to minimize signal reflections. 2.Signal Integrity Management: Addressing signal distortion caused by loss, reflection, crosstalk, and ground bounce. 3.Power Integrity Assurance: Providing stable, clean power to high-speed chips and reducing simultaneous switching noise. 4.Strict Stack-up Design: Precise layer planning to provide clear reference planes for high-speed signals, controlling impedance and minimizing crosstalk. 5.Selection of Low-Loss Materials: Such as Megtron6, to reduce dielectric loss effects on high-frequency signals. 6.Implementation of Advanced Processes: Including resin-filled vias and back-drilling to improve via performance and reduce signal attenuation and reflection.

3.PCB Stackup (18-Layer Rigid Structure)

This PCB features a symmetrical 18-layer structure designed to provide optimal transmission environment and impedance control for high-speed signals. Total pressed thickness is 1.976mm.

Data Centers & Cloud Computing: High-end server/workstation motherboards for CPU, memory, and high-speed bus interconnects. Network switches/routers, including 100G/400G/800G Ethernet switch chip interconnect boards and optical module driver boards. AI accelerator cards/GPU boards meeting extremely high-bandwidth memory interface and chip-to-chip interconnect requirements.

Communication Infrastructure: 5G/6G base station units (AAU, DU) for high-speed digital processing boards and RF front-end interface boards. Optical transmission equipment, including coherent optical modules and high-speed signal processing boards in OTN devices.

High-Performance Computing & Storage: Supercomputer interconnect backplanes. All-flash array controller boards, NVMe over Fabric accelerator cards.

Advanced Test & Measurement Instruments: Internal signal acquisition and processing boards for high-speed digital oscilloscopes, bit error rate testers, and network analyzers.

Automotive Electronics (Advanced): Autonomous driving domain controllers, high-resolution vehicle camera processing boards, in-vehicle high-speed Ethernet switches.

Aerospace & Defense: Radar signal processors, electronic warfare systems, and high-speed data processing units in satellite communication payloads.

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

This 18-layer M6 high-speed PCB, through the use of top-tier Megtron6 low-loss material, a precise 18-layer stack-up design, ENIG surface finish, and advanced processes like through-hole resin filling, achieves exceptional levels of signal integrity, power integrity, and mechanical reliability. Its design thoroughly considers impedance control, loss minimization, and crosstalk suppression, making it a critical hardware foundation for next-generation data centers, high-speed communication networks, and high-performance computing systems. Rigorous quality control measures, including impedance and low-resistance testing, further ensure stable performance under extreme conditions, meeting the growing challenges of data rates and system complexity in the coming years.

18-Layer M6 High-Speed PCB Front
18-Layer M6 High-Speed PCB Stackup

规格参数

Product Model18-Layer High-Speed PCB
Layer Count18 Layers
Core MaterialPanasonic Megtron6 (R-5775G), Tg ≥185°C
PrepregPanasonic R-5670G (HVLP)
Inner Layer Copper35μm (approx. 1oz)
Outer Layer Copper35μm (approx. 1oz)
Finished Thickness2.013mm
表面处理ENIG, Gold Thickness ≥2μ″, Coverage ~29%
Solder MaskTaiyo PSR-2000 CE887M (CE97), Matte Green
SilkscreenWhite
Special ProcessesThrough-Hole Resin Filling (Plated Cap)
Quality ControlSerial Number, Copper Balance, Impedance Test, Low-Resistance Test
Unit Size240mm x 115mm = 1 PC

层叠结构

  1. L1 (Top) · Copper · 0.035mmcopper
  2. D1 · R-5670(G) Prepreg · 0.076mmcore
  3. L2 · Copper · 0.018mmcopper
  4. C1 · Core R-5775(G) · 0.1mmcore
  5. L3 · Copper · 0.018mmcopper
  6. D2 · R-5670(G) Prepreg · 0.076mmcore
  7. L4 · Copper · 0.018mmcopper
  8. C2 · Core R-5775(G) · 0.1mmcore
  9. L5 · Copper · 0.018mmcopper
  10. D3 · R-5670(G) Prepreg · 0.076mmcore
  11. L6 · Copper · 0.035mmcopper
  12. C3 · Core R-5775(G) · 0.2mmcore
  13. L7 · Copper · 0.035mmcopper
  14. D4 · R-5670(G) Prepreg · 0.076mmcore
  15. L8 · Copper · 0.035mmcopper
  16. C4 · Core R-5775(G) · 0.1mmcore
  17. L9 · Copper · 0.018mmcopper
  18. D5 · R-5670(G) Prepreg · 0.076mmcore
  19. L10 · Copper · 0.018mmcopper
  20. C5 · Core R-5775(G) · 0.1mmcore
  21. L11 · Copper · 0.018mmcopper
  22. D6 · R-5670(G) Prepreg · 0.076mmcore
  23. L12 · Copper · 0.018mmcopper
  24. C6 · Core R-5775(G) · 0.076mmcore
  25. L13 · Copper · 0.018mmcopper
  26. D7 · R-5670(G) Prepreg · 0.036mmcore
  27. L14 · Copper · 0.018mmcopper
  28. C7 · Core R-5775(G) · 0.076mmcore
  29. L15 · Copper · 0.018mmcopper
  30. D8 · R-5670(G) Prepreg · 0.076mmcore
  31. L16 · Copper · 0.018mmcopper
  32. C8 · Core R-5775(G) · 0.1mmcore
  33. L17 · Copper · 0.018mmcopper
  34. L18 (Bottom) · Copper · 0.035mmcopper
  35. Total · Pressed Thickness · 1.976mmcore

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com