BICHENGPCBBicheng Technologies Limited

Wangling F4BTMS220 DK2.20 Df0.0009(大于 0.09mm)覆铜板

产品简介

F4BTMS220 is an advanced ceramic-filled PTFE laminate reinforced with ultra-thin fiberglass cloth, designed for high-reliability RF and microwave printed circuit board applications. As an upgraded version of the F4BTM series, it offers enhanced dielectric stability, low loss, and excellent thermal performance, making it suitable for aerospace, military, and high-frequency electronic systems.

技术特性与优势

  1. 1.Low and Stable Dielectric Constant: Dk = 2.20 ±0.02 at 10 GHz, with excellent consistency between batches.
  2. 2.Ultra-Low Loss: Dissipation factor as low as 0.0009 at 10 GHz, ensuring minimal signal attenuation.
  3. 3.Excellent Frequency Stability: Stable Dk and loss values up to 40 GHz, suitable for phase-sensitive applications.
  4. 4.Low Thermal Expansion: CTE in XY direction: 40–50 ppm/°C, Z direction: 290 ppm/°C, ensuring dimensional stability.
  5. 5.High Thermal Conductivity: 0.26 W/(m·K) in Z direction for improved heat dissipation in power applications.

应用领域

  • Aerospace & Avionics: Spacecraft onboard systems, cabin equipment.
  • Military Radar: Phased array antennas, radar systems.
  • RF & Microwave Circuits: Low-noise amplifiers, filters, couplers.
  • Satellite Communications: Feed networks, high-frequency transceivers.
  • Phase-Sensitive Antennas: Where stable Dk and low loss are critical.
  • Copper Foil: Standard RTF low-profile copper, 0.5 oz and 1 oz thicknesses.
  • Panel Sizes: 305×460 mm, 460×610 mm, 610×920 mm.
  • Thickness Range: From 0.090 mm (3.5 mil) upward, with tight tolerances.
  • Metal-Clad Options: Aluminum or copper-backed versions available (F4BTMS220–AL/CU).
  • Special Options: 50 Ω embedded resistor foil for resistive layer designs.
Wangling F4BTMS220 Laminate

典型性能参数:Wangling F4BTMS220

本表为材料本身的介电与机械特性,与上面的板级规格参数不同。

打开独立数据表(可打印)
Wangling F4BTMS220
PropertyTest ConditionUnitF4BTMS220
Dielectric Constant (Typ.)10 GHz–2.20
Dk Tolerance––±0.02
Design Dk10 GHz–2.20
Loss Tangent (Typ.) @10 GHz10 GHz–0.0009
Loss Tangent (Typ.) @20 GHz20 GHz–0.0010
Loss Tangent (Typ.) @40 GHz40 GHz–0.0013
TC of Dk–55°C to 150°Cppm/°C–130
Peel Strength (1 oz RTF)RTF CopperN/mm>2.4
Volume ResistivityAmbientMΩ·cm≥1×10⁸
Surface ResistivityAmbientMΩ≥1×10⁸
Dielectric Strength (Z)5 kV, 500 V/skV/mm>26
Breakdown Voltage (XY)5 kV, 500 V/skV>35
CTE (XY)–55°C to 288°Cppm/°C40–50
CTE (Z)–55°C to 288°Cppm/°C290
Water Absorption20±2°C, 24 h%0.02
DensityAmbientg/cm³2.18
Operating Temperature–°C–55 to +260
Thermal Conductivity (Z)Z-directionW/(m·K)0.26
Flammability–UL 94V-0
Composition––PTFE, Ultra-Thin Quartz Fiberglass, Ceramic Fillers

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com