面向雷达与微波应用的 TLX-6 2 层 3.5mil 沉金高频电路板
(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)
产品简介
TLX-6 is a PTFE fiberglass laminate, a type of high volume antenna material which offers reliability in a wide range of RF applications. This material is versatile due to its wide range available thicknesses and copper cladding. It is suitable for low layer count microwave designs, offering mechanical reinforcement wherever a substrate experiences severe environments.
This 2-layer rigid PCB is constructed entirely with TLX-6 as the core material at 3.5mil (0.089mm) thickness, with ENIG surface finish, white top silkscreen, and 1oz copper on both sides. Its DK of 2.65 offers excellent high-frequency performance, making it ideal for demanding applications such as radar systems, mobile communications, microwave test equipment, antennas, couplers, splitters, combiners, and amplifiers.
TLX offers reliability in a wide range of RF applications. This material is versatile due to its 2.45 - 2.65 DK range and available thicknesses and copper cladding. It is suitable for low layer count microwave designs. TLX PTFE fiberglass laminates are ideal for use in radar systems, mobile communications, microwave test equipment, microwave transmission devices and RF components.
TLX is a workhorse in the RF microwave substrate world where the fiberglass offers mechanical reinforcement wherever a substrate experiences severe environments such as:
- Resistance to creep for PWBs bolted to a housing that encounters high levels of vibration during space launch
- High temperature exposure in engine modules
- Radiation resistance in space (see NASA's website for low outgassing materials)
- Resistance to extreme environments at sea for warship antennas
- Resistance to a wide temperature range for altimeter substrates during flight
Resistance to creep for PWBs bolted to a housing that encounters high levels of vibration during space launch
High temperature exposure in engine modules
Radiation resistance in space (see NASA's website for low outgassing materials)
Resistance to extreme environments at sea for warship antennas
Resistance to a wide temperature range for altimeter substrates during flight
The wide range of dielectric constants available enable the manufacture of couplers, splitters, combiners, amplifiers, antennas and other components.
TLX-6 is noteworthy in that it is available as a very thin laminate (3.5mil) for coupler-type applications. TLX can be combined with any of AGC's available copper claddings. The surface of TLX has been optimized for copper adhesion.
技术特性与优势
- Dielectric Constant (DK): 2.65 ± 0.04 at 10GHz
- Dissipation Factor (Df): 0.0016 at 1.9GHz / 0.0022 at 10GHz
- Excellent PIM Values (measured at lower than -160 dBc)
- Excellent Mechanical & Thermal Properties
- Low and Stable DK
- Dimensionally Stable
- Low Moisture Absorption
- Tightly Controlled DK
- Low DF
- UL 94 V-0 Rating
- Low Outgassing — TML: 0.09%, CVCM: <0.01%, WVR: 0.06%
- For Low Layer Count Microwave Designs
- Resistance to extreme environments (space launch vibration, high temperature, radiation, sea environment, wide temperature range)
- Stable DK (2.65±0.04) — Consistent impedance control for high-frequency designs
- Low Df (0.0022 @ 10GHz) — Excellent high-frequency performance with minimal signal loss
- Excellent PIM Performance (<-160 dBc) — Ideal for low intermodulation applications
- PTFE Fiberglass Reinforcement — Mechanical strength for severe environments
- Low Outgassing — TML 0.09%, CVCM <0.01% — Suitable for space applications
- Wide Temperature Range Resistance — Reliable in extreme thermal environments
- Radiation Resistance — Ideal for space and defense applications
- ENIG Finish — Excellent solderability, corrosion resistance, and wire bondability
- DK 2.65 ± 0.04 @ 10GHz:Stable dielectric constant for consistent impedance control
- Df 0.0016 @ 1.9GHz / 0.0022 @ 10GHz:Low loss for high-frequency RF and microwave designs
- PIM < -160 dBc:Excellent low intermodulation performance
- PTFE Fiberglass Reinforcement:Mechanical strength for severe environments (space, sea, high temperature)
- Low Outgassing (TML 0.09%, CVCM <0.01%):Space-grade material, NASA compliant
- UL 94 V-0 Rating:Flame retardant safety standard
- Low Moisture Absorption:Stable electrical performance in humid environments
- Dimensionally Stable:Reliable performance across temperature variations
- ENIG surface finish:Excellent solderability, corrosion resistance, wire bondability
产品图片
规格参数
| Base material | Taconic TLX-6 (PTFE Fiberglass Laminate) |
| Layer count | 2-layer rigid PCB |
| Board dimensions | 105mm x 98mm = 1 PCS, ±0.15mm |
| Minimum Trace/Space | 5/7 mils |
| Minimum Hole Size | 0.3mm |
| Blind vias | No |
| Finished board thickness | 0.2mm |
| Finished Cu weight | 1 oz (35 μm / 1.4 mils) all layers |
| Via plating thickness | 20 μm |
| Surface finish | ENIG (Electroless Nickel Immersion Gold) |
| Top Silkscreen | White |
| Bottom Silkscreen | No |
| Top Solder Mask | No |
| Bottom Solder Mask | No |
| 100% Electrical test | Used prior to shipment |
| Parameter | Options |
| Dielectric Thickness Range | 0.0035" - 0.250" (0.089mm - 6.35mm) |
| Standard Panel Sizes | 18" x 24" (457mm x 610mm), other sizes available upon request |
| Standard Claddings | Various copper cladding options available |
| DK Options (TLX Family) | 2.45 (TLX-0), 2.50 (TLX-9), 2.55 (TLX-8), 2.60 (TLX-7), 2.65 (TLX-6) |
Part Number Example: TLX-6-0310-CH/CH - 18" x 24" (457mm x 610mm)
叠层结构
- Layer: Copper_layer_1 (Top), Material: Copper, Thickness: 35 μm (1 oz)
- Layer: Dielectric, Material: Taconic TLX-6 Core, Thickness: 0.089 mm (3.5mil)
- Layer: Copper_layer_2 (Bottom), Material: Copper, Thickness: 35 μm (1 oz)
PCB 统计
- Components: 102
- Total Pads: 98
- Thru Hole Pads: 61
- Top SMT Pads: 37
- Bottom SMT Pads: 0
- Vias: 127
- Nets: 2
应用领域
- Radar systems
- Mobile communications
- Microwave test equipment
- Microwave transmission devices
- Antennas
- Couplers, splitters, combiners, amplifiers
- Mixers, filters and passive components
- Space and aerospace equipment (low outgassing, radiation resistance)
- Warship antennas (extreme sea environment resistance)
- Altimeter substrates (wide temperature range resistance)
- Radar systems
- Mobile communications
- Microwave test equipment
- Microwave transmission devices
- Antennas
- Couplers, splitters, combiners, amplifiers
- Mixers, filters and passive components
- Space and aerospace equipment (low outgassing, radiation resistance)
- Warship antennas (extreme sea environment resistance)
- Altimeter substrates (wide temperature range resistance)
材料参数
TLX Series Typical Properties
| Property | TLX-0 | TLX-6 | TLX-7 | TLX-8 | TLX-9 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|---|---|---|---|
| Dielectric Constant @ 10 GHz | 2.45 | 2.65 | 2.60 | 2.55 | 2.50 | — | — | 10 GHz | IPC-TM-650 2.5.5.3 |
| Dissipation Factor @ 1.9 GHz | 0.0009 | 0.0016 | 0.0014 | 0.0012 | 0.0010 | — | — | 1.9 GHz | IPC-TM-650 2.5.5.5.1 |
| Dissipation Factor @ 10 GHz | 0.0012 | 0.0022 | 0.0020 | 0.0017 | 0.0015 | — | — | 10 GHz | IPC-TM-650 2.5.5.5.1 |
| Dielectric Breakdown | >45 | >45 | >45 | >45 | >45 | — | kV | — | IPC-TM-650 2.5.6 |
| Moisture Absorption | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | — | % | — | IPC-TM-650 2.6.2.1 |
| Peel Strength (1oz ED) | — | — | — | 15 | — | — | lbs/in | After thermal stress | IPC-TM-650 2.4.8 |
| Surface Resistivity | — | — | — | 6.6×10⁸ | — | — | MΩ | Elevated temp | IPC-TM-650 2.5.17.1 |
| Volume Resistivity | — | — | — | 1.1×10¹⁰ | — | — | MΩ·cm | Elevated temp | IPC-TM-650 2.5.17.1 |
| CTE (X) (25–260°C) | — | — | — | 21 | — | X | ppm/°C | 25–260°C | IPC-TM-650 2.4.41 |
| CTE (Y) (25–260°C) | — | — | — | 23 | — | Y | ppm/°C | 25–260°C | IPC-TM-650 2.4.41 |
| CTE (Z) (25–260°C) | — | — | — | 215 | — | Z | ppm/°C | 25–260°C | IPC-TM-650 2.4.41 |
| Thermal Conductivity | — | — | — | 0.19 | — | — | W/(m·K) | — | ASTM F433 |
| Density | — | — | — | 2.25 | — | — | g/cm³ | — | ASTM D792 |
| Td (2% weight loss) | — | — | — | 535 | — | — | °C | TGA | IPC-TM-650 2.4.24.6 |
| Flammability | V-0 | V-0 | V-0 | V-0 | V-0 | — | — | — | UL94 |
质量保证
- Type of artwork supplied: Gerber RS-274-X
- Accepted standard: IPC-Class-2
- Availability: Worldwide
- 100% Electrical test prior to shipment
- Type of artwork supplied: Gerber RS-274-X
- Accepted standard: IPC-Class-2
- Availability: Worldwide
- 100% Electrical test prior to shipment
TLX 系列型号
| Designation | DK @ 10GHz | Dielectric Thickness Range |
|---|---|---|
| TLX-0 | 2.45 | 0.0035" - 0.250" (0.089mm - 6.35mm) |
| TLX-9 | 2.50 | 0.0035" - 0.250" (0.089mm - 6.35mm) |
| TLX-8 | 2.55 | 0.0035" - 0.250" (0.089mm - 6.35mm) |
| TLX-7 | 2.60 | 0.0035" - 0.250" (0.089mm - 6.35mm) |
| TLX-6 | 2.65 ± 0.04 | 0.0035" - 0.250" (0.089mm - 6.35mm) |
数据来源说明
- PIM Measurement: Using manufactured PCB coupon with 20 watts per channel @ 800 and 1800 MHz.
- DK variation from -55°C to 125°C is ~ ±2%.
- Outgassing properties as reported by NASA. See http://outgassing.nasa.gov/og_disclaimer.html
- All test data are typical measurement values intended to assist customers in material selection. They do not constitute any express or implied warranty and do not guarantee performance in specific applications. Customers are responsible for verifying the suitability of Taconic materials for each application.
PIM Measurement: Using manufactured PCB coupon with 20 watts per channel @ 800 and 1800 MHz.
DK variation from -55°C to 125°C is ~ ±2%.
Outgassing properties as reported by NASA. See http://outgassing.nasa.gov/og_disclaimer.html
All test data are typical measurement values intended to assist customers in material selection. They do not constitute any express or implied warranty and do not guarantee performance in specific applications. Customers are responsible for verifying the suitability of Taconic materials for each application.
