BICHENGPCBBicheng Technologies Limited

Taconic TLY-3 DK2.33 Df0.0012 (0.09-1.52mm) 覆铜板

产品简介

TLY-3 laminates are manufactured with very lightweight woven fiberglass and are much more dimensionally stable than chopped fiber reinforced PTFE composites. The woven matrix in the TLY-3 material yields a more mechanically stable laminate that is suitable for high volume manufacturing. The low dissipation factor enables successful deployment for automotive radar applications designed at 77 GHz as well as other antennas in millimeter wave frequencies. Comparative OEM testing at 77 GHz has shown equivalent insertion losses/dielectric properties compared to chopped fiber reinforced competitors, with the primary benefit being much higher manufacturing yields. TLY-3FF is a highly flexible variant designed for applications requiring installation with a bend radius, offering flexibility comparable to chopped fiber reinforced PTFE laminates but with a lower loss tangent, along with the dimensional stability typical of standard fiberglass reinforced laminates.

技术特性与优势

  1. 1.Dimensionally Stable
  2. 2.Lowest Df
  3. 3.High Peel Strength
  4. 4.Low Moisture Absorption
  5. 5.Uniform, Consistent Dk
  6. 6.Laser Ablatable

应用领域

  • Automotive Radar
  • Satellite/Cellular Communications
  • Power Amplifiers
  • LNBs, LNAs, LNCs
  • Aerospace
Taconic TLY-3 Laminate

典型性能参数:TLY-3

本表为材料本身的介电与机械特性,与上面的板级规格参数不同。

打开独立数据表(可打印)
TLY-3
PropertiesConditionsTypical ValueUnitTest Method
Dielectric Constant@ 10 GHz2.33 ± 0.02—IPC-650 2.5.5.5
Dissipation Factor@ 10 GHz0.0012—IPC-650 2.5.5.5
Volume Resistivity—10¹⁰Mohms/cmIPC-650 2.5.17.1 (after elevated temp.)
——10¹⁰Mohms/cmIPC-650 2.5.17.1 (after humidity)
Surface Resistivity—10⁸MohmsIPC-650 2.5.17.1 (after elevated temp.)
——10⁸MohmsIPC-650 2.5.17.1 (after humidity)
Thermal Conductivity—0.22W/m·KASTM F 433
CTE (25-260°C)X26ppm/°CASTM D 3386 (TMA)
—Y15ppm/°C—
—Z217ppm/°C—
Peel Strength1/2 oz. ED copper1.96 (11)N/mm (lbs/in)IPC-650 2.4.8
—1 oz. CL1 copper2.86 (16)N/mm (lbs/in)IPC-650 2.4.8
—1 oz. C1 copper3.04 (17)N/mm (lbs/in)IPC-650 2.4.8
——2.32 (13)N/mm (lbs/in)IPC-650 2.4.8 (at elevated temp.)
Flexural StrengthMD96.91 (14,057)N/mm² (psi)IPC-650 2.4.4
—CD89.32 (12,955)N/mm² (psi)IPC-650 2.4.4
Young's ModulusMD9.65 × 10³ (1.4 × 10⁶)N/mm² (psi)ASTM D 3039 / IPC-650 2.4.19
Poisson's RatioMD0.21—ASTM D 3039 / IPC-650 2.4.19
DensitySpecific Gravity2.19g/cm³ASTM D 792
Dimensional StabilityMD, 10 mil-0.038mm/m (mils/in)IPC-650 2.4.39 (avg. after bake & thermal stress)
—CD, 10 mil-0.038mm/m (mils/in)IPC-650 2.4.39
Moisture Absorption—0.02%IPC-650 2.6.2.1
NASA OutgassingTML0.01%—
—CVCM0.01%—
—WVR0.01%—
UL-94 Flammability Rating—V-0—UL-94

可选规格

  • Typical Thicknesses: 0.0035 inch / 0.09 mm, 0.0050 inch / 0.13 mm, 0.0075 inch / 0.19 mm, 0.0100 inch / 0.25 mm, 0.0200 inch / 0.51 mm, 0.0300 inch / 0.76 mm, 0.0600 inch / 1.52 mm
  • Available Sheet Sizes: 12 x 18 inch / 305 x 457 mm, 16 x 18 inch / 406 x 457 mm, 18 x 24 inch / 457 x 610 mm, 16 x 36 inch / 406 x 914 mm, 24 x 36 inch / 610 x 914 mm, 18 x 48 inch / 457 x 1220 mm

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com