Rogers RT/duroid 6002 DK2.94 Df0.0012 (0.005-0.060") PTFE 陶瓷层压板
产品简介
RT/duroid 6002 is a PTFE/ceramic laminate designed for high-frequency circuit applications requiring consistent electrical performance across a wide temperature range. It offers a dielectric constant of 2.94 ±0.04 (for thicknesses ≥0.020") and an ultra-low dissipation factor of 0.0012 at 10 GHz. The material features excellent thermal stability with a thermal coefficient of dielectric constant of +5 ppm/°C, making it ideal for applications requiring stable phase and amplitude performance across temperature variations.
技术特性与优势
- 1.Dielectric Constant: 2.94 ±0.04 (for thicknesses ≥0.020")
- 2.Note: 0.005" laminates: 3.06 ±0.04
- 3.Note: 0.010" and 0.015" laminates: 3.02 ±0.04
- 4.Ultra-low dissipation factor: 0.0012 @ 10 GHz
- 5.Excellent thermal stability: TCDk +5 ppm/°C (-50°C to +150°C)
- 6.Low Z-axis CTE: 30 ppm/°C for superior plated through hole reliability
- 7.Very low moisture absorption: 0.04%
- 8.High thermal conductivity: 0.68 W/m/K
- 9.UL 94 V-0 flammability rating
- 10.Lead-free process compatible
- 11.Excellent dimensional stability
- 12.High copper peel strength
应用领域
- Microwave circuits and components
- Aerospace and defense systems
- Satellite communications
- Phased array antennas
- High-reliability RF components
- Military electronics
- Base station infrastructure
- Automotive radar systems
- Power amplifiers
- Filters and couplers
典型性能参数:Rogers RT/duroid 6002
本表为材料本身的介电与机械特性,与上面的板级规格参数不同。
打开独立数据表(可打印)| Property | Typical Value | Direction | Units | Conditions | Test Method |
|---|---|---|---|---|---|
| Electrical Properties | |||||
| Dielectric Constant εr | 2.94 ± 0.04 [3] | Z | - | 10 GHz/23°C | IPC-TM-650, 2.5.5.5 |
| Dissipation Factor, Tan δ | 0.0012 | Z | - | 10 GHz/23°C | IPC-TM-650, 2.5.5.5 |
| Thermal Coefficient of εr | +5 | Z | ppm/°C | 10 GHz, -50 to +150°C | IPC-TM-650, 2.5.5.5 |
| Volume Resistivity | 10⁶ | Z | MΩ·cm | A | ASTM D257 |
| Surface Resistivity | 10⁹ | — | MΩ | A | ASTM D257 |
| Mechanical Properties | |||||
| Tensile Modulus | 1007 (146) | X, Y | MPa (kpsi) | 23°C | ASTM D638 |
| Ultimate Stress | 30 (4.3) | X, Y | MPa (kpsi) | 23°C | ASTM D638 |
| Ultimate Strain | 4.9 | X, Y | % | 23°C | ASTM D638 |
| Compressive Modulus | 1035 (150) | Z | MPa (kpsi) | — | ASTM D638 |
| Copper Peel Strength | 9.1 (1.6) | — | lbs/in (N/mm) | — | IPC-TM-650 2.4.8 |
| Dimensional Stability | 0.07 | X, Y | mm/m (mil/inch) | after etch + E2/150°C | IPC-TM-650, 2.4.39 |
| Thermal Properties | |||||
| Coefficient of Thermal Expansion | 15 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| — | 15 | Y | ppm/°C | -55 to 288°C | — |
| — | 30 | Z | ppm/°C | -55 to 288°C | — |
| Thermal Conductivity | 0.68 | — | W/m/K | 80°C | ASTM C518 |
| Td | 500 | — | °C | — | ASTM D3850 |
| Physical Properties | |||||
| Moisture Absorption | 0.04 | — | % | D23/24, D48/50 | IPC-TM-650, 2.6.2.1 / ASTM D570 |
| Density | 2.1 | — | g/cm³ | — | ASTM D792 |
| Specific Heat | 0.93 (0.22) | — | J/g/K (BTU/lb/°F) | — | Calculated |
| Flammability | V-0 | — | — | — | UL 94 |
| Lead-Free Process Compatible | YES | ||||
可选规格
- Standard Thicknesses:
- 0.005" (0.127 mm) +/- 0.0005"
- 0.020" (0.508 mm) +/- 0.0010"
- 0.030" (0.762 mm) +/- 0.0010"
- *Additional non-standard thicknesses available from 0.005" to 0.060" in varying increments*
- Standard Panel Sizes:
- 12" x 18" (305 mm x 457 mm)
- 24" x 18" (610 mm x 457 mm)
- Additional panel sizes available upon request
- Standard Claddings:
- Electrodeposited Copper Foil:
- ½ oz (18µm) HH/HH
- 1 oz (35µm) H1/H1
- Rolled Copper Foil:
- ½ oz (18µm) 5R/5R
- 1 oz (35µm) 1R/1R
- Additional claddings and cladding weights, such as resistive foil and reverse treated ED, are available
