BICHENGPCBBicheng Technologies Limited

面向高 Dk 射频与微波应用的 RF-10 2 层 0.75mm 厚电路板

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

RF-10 copper clad laminates are composites of ceramic-filled PTFE and woven fiberglass. RF-10 offers the advantage of a high dielectric constant and low dissipation factor. The use of thin woven fiberglass reinforcement provides both low dielectric loss and improved rigidity for easier handling, as well as enhanced dimensional stability for multilayer circuits.

RF-10 laminates are engineered to deliver a cost-effective substrate with industry-acceptable lead times. RF-10 meets the need for size reduction in RF applications. It bonds well to smooth low-profile copper, and its low dissipation factor, combined with very smooth copper, results in optimal insertion loss performance at higher frequencies where skin effect losses are significant.

Dielectric Constant: 10.2 ±0.3 at 10GHz Dissipation Factor: 0.0025 at 10GHz High Thermal Conductivity: 0.85 W/mK (Unclad) CTE: x-axis 16 ppm/°C, y-axis 20 ppm/°C, z-axis 25 ppm/°C Low Moisture Absorption: 0.08% Flammability Rating: UL 94 V-0

High Dk enables RF circuit miniaturization Excellent dimensional stability Tight Dk tolerance (10.2 ±0.3) High thermal conductivity for improved thermal management Strong adhesion to smooth copper surfaces Low CTE in X, Y, Z directions Excellent price-to-performance ratio

Copper layer 1: 35µm (1oz) RF-10 Core: 25mil (0.635mm) Copper layer 2: 35µm (1oz)

Components: 21 Total pads: 56 Through-hole pads: 41 Top SMT pads: 15 Bottom SMT pads: 0 Vias: 44 Nets: 2

Microstrip patch antennas GPS antennas Passive components (filters, couplers, power dividers) Aircraft collision avoidance systems Satellite components

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

RF-10 PCB

规格参数

Base MaterialRF-10
Layer Count2-layer
Board Dimensions90mm x 70mm (±0.15mm)
Minimum Trace/Space6/6 mils
Minimum Hole Size0.3mm
Blind ViasNo
Finished Board Thickness0.75mm
Finished Cu Weight1oz (1.4 mils)
Via Plating Thickness20µm
表面处理Immersion Gold
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com