混合电路板 混合材料电路板 不同材料组合 PCB RO4350B + FR4 + RT/duroid 5880,沉金
(PCBs are custom-made products, the picture and parameters shown are just for reference)
产品简介
Hello Everyone,
Today, we will discuss hybrid PCBs, specifically those that integrate high-frequency materials with epoxy glass.
技术特性与优势
- The combination of FR-4 and high-frequency materials is increasingly popular because FR-4 and the vast majority of high frequency materials have little compatibility problems.
- To ensure reliable lamination, we select a prepreg sheet of high-frequency material and apply the appropriate pressing cycle. Using an adhesive layer made from the same material simplifies the pressing process.
产品图片
制造能力
| PCB Type: | Hybrid PCB, Mixed PCB |
| Hybrid type: | RO4350B + FR4 |
| RO4003C + FR4 | |
| F4B + FR4 | |
| RT/duroid 5880 + FR4 | |
| RT/duroid 5880 + RO4350B | |
| RO3000 Series + FR4 | |
| RT/duroid + FR4 | |
| Solder mask: | Green, Red, Blue, Black, Yellow |
| Layer count: | 4 Layer, 6 Layer, Multilayer |
| Copper weight: | 1oz (35µm), 2oz (70µm) |
| PCB thickness: | 1.0-10mm |
| PCB size: | ≤400mm X 500mm |
| Surface finish: | Bare copper, HASL, ENIG, Immersion tin, Immersion silver, OSP, ENEPIG, Pure gold |
Thank you for reading! Feel free to contact us for any PCB inquiries.
材料参数
RO4350B Typical Properties
| Property | RO4350B | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.48 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.66 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0037 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +50 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.2 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 5.7 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.05 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.69 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 10 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 12 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 32 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 5.0 (0.88) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.9 | — | g/cm³ | — | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
混压 PCB 结构解析
Let's examine the stack-up to grasp the hybrid configuration:
Layer 1 to layer 2 is the core of RO4350B high frequency material and layer 3 to layer 4 is the core of FR-4 epoxy glass. The 2 cores are bonded by a sheet of adhesive (prepreg).
混压 PCB 类型
Hybrid PCBs can combine FR-4 with high-frequency materials, as mentioned above. Another type is a mixture of high frequency material with different dielectric constant (DK), for example RT/duroid 5880 and RO4350B etc.
采用混压 PCB 的原因
There are three primary reasons to opt for high-frequency multilayer PCBs: cost-effectiveness, enhanced reliability, and improved electrical performance.
- Cost Efficiency: High-frequency materials are generally more expensive than FR-4. By using a hybrid of FR-4 and high-frequency materials, manufacturers can address cost concerns effectively.
- Reliability Improvement: High Coefficient of Thermal Expansion (CTE) values in PCB materials can lead to reliability issues. Combining low CTE FR-4 with higher CTE materials results in an acceptable composite CTE, thereby enhancing reliability.
- Tailored Electrical Performance: Different sections of a mixed PCB may require varying levels of electrical performance. For areas needing high performance, high-frequency materials are employed, while less demanding sections can use FR-4. Additionally, using materials with different DK values can improve electrical properties, particularly in combiners and filters.
