AGC TLX-6 DK2.65 Df0.0016 (0.089-6.35mm) PTFE/编织玻璃纤维层压板
产品简介
TLX is a high-volume fiberglass-reinforced microwave substrate offering reliability in a wide range of RF applications. This versatile PTFE/fiberglass laminate features a dielectric constant range of 2.45-2.65 and is available in various thicknesses and copper claddings. TLX-6 has a dielectric constant of 2.65 ±0.04 and is suitable for low layer count microwave designs, particularly where mechanical reinforcement is required in severe environments.
技术特性与优势
- 1.Excellent PIM values in PCBs (measured lower than -160 dBc*)
- 2.Excellent mechanical and thermal properties
- 3.Low and stable dielectric constant
- 4.Dimensionally stable
- 5.Low moisture absorption
- 6.Tightly controlled Dk (±0.04)
- 7.Low dissipation factor (Df 0.0016 @ 1.9GHz, 0.0022 @ 10GHz)
- 8.UL 94 V-0 flammability rating
- 9.For low layer count microwave designs
- 10.Long space heritage with NASA low outgassing compliance
- 11.~ ±2% variation in Dk from -55°C to 125°C
- 12.Surface optimized for copper adhesion
应用领域
- Antennas
- Mixers, Splitters, Filters & Combiners
- Passive Components
- Radar systems
- Mobile communications
- Microwave test equipment
- Microwave transmission devices
- RF components
- Applications requiring resistance to severe environments:
- Space launch vibration resistance
- High temperature exposure in engine modules
- Radiation resistance in space
- Extreme maritime environments for warship antennas
- Wide temperature ranges for altimeter substrates during flight
典型性能参数:AGC TLX-6 / PTFE + Woven Fiberglass
本表为材料本身的介电与机械特性,与上面的板级规格参数不同。
打开独立数据表(可打印)| Property | Test Method | Unit | TLX-6 | Unit | TLX-6 |
|---|---|---|---|---|---|
| Electrical Properties | |||||
| Dk @ 10 GHz | IPC-650 2.5.5.3 | — | 2.65 | — | 2.65 |
| Df @ 1.9 GHz | IPC-650 2.5.5.5.1 | — | 0.0016 | — | 0.0016 |
| Df @ 10 GHz | IPC-650 2.5.5.5.1 | — | 0.0022 | — | 0.0022 |
| Outgassing (% TML) | ASTM E 595 | % | 0.09 | — | — |
| Outgassing (% CVCM) | ASTM E 595 | % | <0.01 | — | — |
| Outgassing (% WVR) | ASTM E 595 | % | 0.06 | — | — |
| Dielectric Breakdown | IPC-650 2.5.6 | kV | >45 | kV | >45 |
| Surface Resistivity | IPC-650 2.5.17.1 Sec. 5.2.1 (Elevated Temp.) | MΩ | 6.605 x 10⁸ | MΩ | 6.605 x 10⁸ |
| Surface Resistivity | IPC-650 2.5.17.1 Sec. 5.2.1 (Humidity Cond.) | MΩ | 3.550 x 10⁶ | MΩ | 3.550 x 10⁶ |
| Volume Resistivity | IPC-650 2.5.17.1 Sec. 5.2.1 (Elevated Temp.) | MΩ·cm | 1.110 x 10¹⁰ | MΩ·cm | 1.110 x 10¹⁰ |
| Volume Resistivity | IPC-650 2.5.17.1 Sec. 5.2.1 (Humidity Cond.) | MΩ·cm | 1.046 x 10¹⁰ | MΩ·cm | 1.046 x 10¹⁰ |
| Mechanical Properties | |||||
| Flexural Strength (MD) | ASTM D 790 | psi | 28,900 | N/mm² | 199 |
| Flexural Strength (CD) | ASTM D 790 | psi | 20,600 | N/mm² | 142 |
| Tensile Strength (MD) | ASTM D 902 | psi | 35,600 | N/mm² | 245 |
| Tensile Strength (CD) | ASTM D 902 | psi | 27,500 | N/mm² | 190 |
| Elongation at Break (MD) | ASTM D 902 | % | 3.94 | % | 3.94 |
| Elongation at Break (CD) | ASTM D 902 | % | 3.92 | % | 3.92 |
| Young's Modulus (MD) | ASTM D 902 | kpsi | 980 | N/mm² | 6757 |
| Young's Modulus (CD) | ASTM D 902 | kpsi | 1,200 | N/mm² | 8274 |
| Young's Modulus (MD) | ASTM D 3039 | kpsi | 1,630 | N/mm² | 11,238 |
| Poisson's Ratio | ASTM D 3039 | — | 0.135 | — | 0.135 |
| Peel Strength (1 oz. ED) | IPC-650 2.4.8 Sec. 5.2.2 (Thermal Stress) | lbs/in | 15 | N/mm | 2.63 |
| Peel Strength (1 oz. RTF) | IPC-650 2.4.8 Sec. 5.2.2 (Thermal Stress) | lbs/in | 17 | N/mm | 2.98 |
| Peel Strength (½ oz. ED) | IPC-650 2.4.8.3 (Elevated Temp.) | lbs/in | 14 | N/mm | 2.45 |
| Peel Strength (½ oz. ED) | IPC-650 2.4.8 Sec. 5.2.2 (Thermal Stress) | lbs/in | 11 | N/mm | 1.93 |
| Peel Strength (1 oz. rolled) | IPC-650 2.4.8 Sec. 5.2.2 (Thermal Stress) | lbs/in | 13 | N/mm | 2.28 |
| Dimensional Stability (MD) | IPC-650 2.4.39 Sec. 5.4 (After Bake) | mils/in | 0.06 | mm/M | 0.06 |
| Dimensional Stability (CD) | IPC-650 2.4.39 Sec. 5.4 (After Bake) | mils/in | 0.08 | mm/M | 0.08 |
| Dimensional Stability (MD) | IPC-650 2.4.39 Sec. 5.5 (Thermal Stress) | mils/in | 0.09 | mm/M | 0.09 |
| Dimensional Stability (CD) | IPC-650 2.4.39 Sec. 5.5 (Thermal Stress) | mils/in | 0.10 | mm/M | 0.10 |
| Thermal Properties | |||||
| Thermal Conductivity | ASTM F433/ASTM 1530-06 | W/m·K | 0.19 | W/m·K | 0.19 |
| CTE (X axis) (25-260°C) | IPC-650 2.4.41/ASTM D 3386 | ppm/°C | 21 | ppm/°C | 21 |
| CTE (Y axis) (25-260°C) | IPC-650 2.4.41/ASTM D 3386 | ppm/°C | 23 | ppm/°C | 23 |
| CTE (Z axis) (25-260°C) | IPC-650 2.4.41/ASTM D 3386 | ppm/°C | 215 | ppm/°C | 215 |
| Td (2% Weight Loss) | IPC-650 2.4.24.6 (TGA) | °C | 535 | °C | 535 |
| Td (5% Weight Loss) | IPC-650 2.4.24.6 (TGA) | °C | 553 | °C | 553 |
| Physical Properties | |||||
| Moisture Absorption | IPC-650 2.6.2.1 | % | 0.02 | % | 0.02 |
| Density (Specific Gravity) | ASTM D 792 | g/cm³ | 2.25 | g/cm³ | 2.25 |
| Flammability Rating | UL 94 | — | V-0 | — | V-0 |
可选规格
- Dielectric Constant: 2.65 ± 0.04
- Dielectric Thickness Range: 0.0035" - 0.250" (0.089 mm - 6.35 mm)
- Copper Cladding: Can be combined with any of AGC's available copper claddings; surface optimized for copper adhesion
- Part Number Example: TLX-6-0310-CH/CH - 18" x 24" (457 mm x 610 mm)
- Available as very thin laminate for coupler-type applications
