BICHENGPCBBicheng Technologies Limited

Wangling F4BM275 DK2.75 Df0.0015 (0.2-12.0mm) ED 覆铜板

产品简介

Wangling F4BM series are PTFE glass fabric copper-clad laminates made from PTFE resin, PTFE film, and woven glass fabric. They offer improved electrical performance over standard F4B, including a wider dielectric constant range, lower loss, higher insulation resistance, and better stability, making them suitable substitutes for similar international products. F4BM275 uses standard ED copper foil and is ideal for applications without PIM requirements.

技术特性与优势

  1. 1.Selectable Dielectric Constant (Dk) from 2.17 to 3.0; Dk 2.75 with customizable options available
  2. 2.Low dissipation factor (Df 0.0015 @10GHz, 0.0021 @20GHz)
  3. 3.Good dimensional stability and enhanced size control
  4. 4.Radiation resistance and low outgassing
  5. 5.Commercial, high-volume, cost-effective production
  6. 6.UL 94 V-0 flammability rating
  7. 7.Long-term operating temperature: -55°C to +260°C
  8. 8.Very low moisture absorption (≤0.08%)
  9. 9.Note: Higher Dk achieved with increased glass content, resulting in better dimensional stability, lower CTE, and improved thermal stability

应用领域

  • Microwave, RF, Radar
  • Phase Shifters, Passive Components
  • Power Dividers, Couplers, Combiners
  • Feed Networks, Phased Array Antennas
  • Satellite Communication, Base Station Antennas
Wangling F4BM275 Laminate

典型性能参数:Wangling F4BM275

本表为材料本身的介电与机械特性,与上面的板级规格参数不同。

打开独立数据表(可打印)
Wangling F4BM275
PropertiesTest ConditionsUnitF4BM275
Electrical Properties
Dielectric Constant (Typical)10 GHz–2.75
Dielectric Constant Tolerance––±0.05
Dissipation Factor (Typical)10 GHz–0.0015
—20 GHz–0.0021
Temperature Coefficient of Dk-55°C to 150°Cppm/°C-92
Peel Strength1 oz. F4BMN/mm>1.8
Volume ResistivityNormal ConditionMΩ·cm≥6×10⁶
Surface ResistanceNormal ConditionMΩ≥1×10⁶
Dielectric Strength (Z-direction)5 kW, 500 V/skV/mm>28
Breakdown Voltage (XY-direction)5 kW, 500 V/skV>35
Thermal & Mechanical Properties
CTEXY-direction, -55°C to 288°Cppm/°C14~16
—Z-direction, -55°C to 288°Cppm/°C112
Thermal Stress260°C, 10s, 3 cycles–No Delamination
Water Absorption20±2°C, 24 hours%≤0.08
DensityRoom Temperatureg/cm³2.28
Long-term Operating Temperature–°C-55 to +260
Thermal ConductivityZ-directionW/(m·K)0.38
Flammability Rating–UL-94V-0
Material Composition––PTFE, Glass Fiber Cloth; F4BM uses ED copper foil

可选规格

  • Copper Foil Options for F4BM: ED Copper Foil. Available thicknesses: 0.5 oz (0.018mm), 1 oz (0.035mm), 1.5 oz (0.05mm), 2 oz (0.07mm).
  • Standard Panel Sizes Available:
  • 460 × 610 mm
  • 500 × 600 mm
  • 850 × 1200 mm
  • 914 × 1220 mm
  • 1000 × 1200 mm
  • Available Thicknesses & Tolerances (Conventional):
  • Thickness (mm): 0.2 (core, minimum for Dk ≥2.7), 0.25, 0.5, 0.508, 0.762, 0.8, 1.0, 1.5, 1.524, 1.575, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0, 12.0.
  • Corresponding tolerances range from ±0.02mm to ±0.20mm.
  • Note: For Dk ≥2.7, minimum core thickness is 0.2mm.
  • F4BM Series with Metal Core (Aluminum/Copper Base):
  • Models: F4BM*-AL (Aluminum base), F4BM*-CU (Copper base)
  • Serves for shielding or heat dissipation
  • Example: F4BM275-AL represents F4BM275 with aluminum base; F4BM275-CU represents F4BM275 with copper base
  • Standard sizes available: 460×610 mm, 460×305 mm; other sizes upon request

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com