BICHENGPCBBicheng Technologies Limited

Rogers DiClad 527 DK2.40-2.60 Df0.0017 (0.020-0.060") PTFE/编织玻璃纤维层压板

产品简介

DiClad series laminates are woven fiberglass/PTFE composite materials used as printed circuit board substrates. DiClad 527 utilizes a higher fiberglass/PTFE ratio to provide mechanical properties approaching those of conventional substrates, along with improved dimensional stability and lower thermal expansion in all directions. The coated fiberglass plies are aligned in the same direction, ensuring consistent performance.

技术特性与优势

  1. 1.Woven fiberglass reinforcement for greater dimensional stability.
  2. 2.Precise control of fiberglass/PTFE ratio.
  3. 3.Better dielectric constant uniformity than comparable non-woven laminates.
  4. 4.Low thermal expansion in X, Y, and Z directions.
  5. 5.Excellent mechanical strength and peel strength.

应用领域

  • Filters, Couplers, Low Noise Amplifiers (LNAs)
  • Power Dividers and Combiners
  • Applications where dielectric constant uniformity and low loss are critical.
Rogers DiClad 527 Laminate

典型性能参数:DiClad 527

本表为材料本身的介电与机械特性,与上面的板级规格参数不同。

打开独立数据表(可打印)
DiClad 527
PropertyTest MethodConditionDiClad 527
Electrical Properties
Dielectric Constant @ 10 GHzIPC TM-650 2.5.5.523˚C @ 50% RH2.40-2.60
Dielectric Constant @ 1 MHzIPC TM-650 2.5.5.323˚C @ 50% RH2.40-2.60
Dissipation Factor @ 10 GHzIPC TM-650 2.5.5.523˚C @ 50% RH0.0017
Dissipation Factor @ 1 MHzIPC TM-650 2.5.5.323˚C @ 50% RH0.0010
Thermal Coefficient of Dk (ppm/˚C)IPC TM-650 2.5.5.5 Adapted-10 to 140˚C-153
Volume Resistivity (MΩ·cm)IPC TM-650 2.5.17.1C96/35/901.2 x 10⁹
Surface Resistivity (MΩ)IPC TM-650 2.5.17.1C96/35/904.5 x 10⁷
Dielectric Breakdown (kV)ASTM D-149D48/50>45
Arc ResistanceASTM D-495->180
Thermal Properties
Coefficient of Thermal Expansion - X (ppm/˚C)IPC TM-650 2.4.4150˚C to 150˚C14
Coefficient of Thermal Expansion - Y (ppm/˚C)IPC TM-650 2.4.4150˚C to 150˚C21
Coefficient of Thermal Expansion - Z (ppm/˚C)IPC TM-650 2.4.2450˚C to 150˚C173
Thermal Conductivity (W/(m·K))ASTM E1461-0.26
Mechanical Properties
Copper Peel Strength (lbs/in)IPC TM-650 2.4.810s @ 288˚C, 35 µm foil14
Young's Modulus (kpsi)ASTM D-63823˚C @ 50% RH517, 706
Tensile Strength (MD, CMD) (kpsi)ASTM D-88223˚C @ 50% RH19.0, 15.0
Compressive Modulus (kpsi)ASTM D-69523˚C @ 50% RH359
Flex Modulus (kpsi)ASTM D-303923˚C @ 50% RH537
Physical Properties
FlammabilityUL 94C48/23/50 & C168/70V-0
Moisture Absorption (%)IPC TM-650 2.6.2.2E1/105 + D24/230.03
Density (g/cm³)ASTM D792 Method AC24/23/502.31
NASA Outgassing
Total Mass Lost (%)NASA SP-R-0022A125°C, ≤ 10⁻⁶ torr0.02
Collected Volatiles (%)NASA SP-R-0022A125°C, ≤ 10⁻⁶ torr0.00
Water Vapor Recovered (%)NASA SP-R-0022A125°C, ≤ 10⁻⁶ torr0.01

可选规格

  • Standard Thicknesses: 0.020" (0.508 mm) +/- 0.0020", 0.030" (0.762 mm) +/- 0.0020", 0.060" (1.524 mm) +/- 0.0020"
  • Standard Panel Sizes: 12" x 18" (305 x 457 mm), 18" x 12" (457 x 305 mm), 18" x 24" (457 x 610 mm), 24" x 18" (610 x 457 mm)
  • Standard Claddings: Electrodeposited Copper Foil: ½ oz. (18 µm), 1 oz. (35 µm)

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com