BICHENGPCBBicheng Technologies Limited

Rogers CLTE-XT DK2.79-2.94 Df0.0010 (0.0051-0.030") PTFE/陶瓷/编织玻璃层压板

产品简介

CLTE-XT laminates are ceramic-filled, woven glass reinforced PTFE composites designed for high-frequency circuit applications requiring ultra-low loss. These materials offer excellent dimensional stability and low planar CTE, providing consistent performance for demanding applications. CLTE-XT laminates are available with a full range of cladding types and have proven performance that makes them a top choice for ground-based and airborne communications and radar systems.

技术特性与优势

  1. 1.Dielectric Constant (process): 2.79 to 2.94 (varies by thickness, see table below)
  2. 2.Dielectric Constant (design): 2.93
  3. 3.Ultra-low dissipation factor: 0.0010 @ 10 GHz
  4. 4.Low planar CTE: X-axis 12.7 ppm/°C, Y-axis 13.7 ppm/°C
  5. 5.Very low Z-axis CTE: 40.8 ppm/°C for reliable plated through holes
  6. 6.Excellent dimensional stability
  7. 7.High electrical strength: 1000 V/mil
  8. 8.High thermal conductivity: 0.56 W/(m·K)
  9. 9.UL 94 V-0 flammability rating
  10. 10.Very low moisture absorption: 0.02%
  11. 11.Low outgassing (NASA compliant)
  12. 12.Excellent PIM performance

应用领域

  • Ground-based communications systems
  • Airborne communications and radar systems
  • Phased array antennas
  • High-reliability microwave components
  • Aerospace and defense electronics
  • Filters and couplers
  • Power amplifiers
  • Applications requiring ultra-low loss performance
Rogers CLTE-XT Laminate

典型性能参数:CLTE-XT

本表为材料本身的介电与机械特性,与上面的板级规格参数不同。

打开独立数据表(可打印)
Data Sheet (CLTE-XT Laminates)
PropertyTypical Value¹UnitsTest ConditionsTest Method
Electrical Properties
Dielectric Constant (process)See Table Below-23°C @ 50% RH, 10 GHzIPC TM-650 2.5.5.5
Dielectric Constant (design)2.93-C-24/23/50, 10 GHzMicrostrip Differential Phase Length
Dissipation Factor0.0010-23°C @ 50% RH, 10 GHzIPC TM-650 2.5.5.5
Thermal Coefficient of Dk-8ppm/°C-50 to 150°C, 10 GHzIPC TM-650 2.5.5.5
Volume Resistivity4.25 x 10⁸MΩ·cmC-96/35/90IPC TM-650 2.5.17.1
Surface Resistivity2.49 x 10⁸MΩC-96/35/90IPC TM-650 2.5.17.1
Electrical Strength1000V/mil-IPC TM-650 2.5.6.2
Dielectric Breakdown58kVD-48/50, X/Y DirectionIPC TM-650 2.5.6
Thermal Properties
Decomposition Temperature (Td)539°C2hrs @ 105°C, 5% Weight LossIPC TM-650 2.3.40
Coefficient of Thermal Expansion - x12.7ppm/°C-55°C to 288°CIPC TM-650 2.4.41
Coefficient of Thermal Expansion - y13.7ppm/°C-55°C to 288°CIPC TM-650 2.4.41
Coefficient of Thermal Expansion - z40.8ppm/°C-55°C to 288°CIPC TM-650 2.4.41
Thermal Conductivity0.56W/(m·K)z directionASTM D5470
Time to Delamination>60minutesas-received, 288°CIPC TM-650 2.4.24.1
Mechanical Properties
Copper Peel Strength after Thermal Stress1.7 (9)N/mm (lbs/in)10s @ 288°C, 35 μm foilIPC TM-650 2.4.8
Flexural Strength (MD, CMD)40.7, 40.0 (5.9, 5.8)MPa (ksi)25°C ± 3°CASTM D790
Tensile Strength (MD, CMD)29.0, 25.5 (4.2, 3.7)MPa (ksi)23°C/50% RHASTM D638
Flex Modulus (MD, CMD)3247, 3261 (471, 473)MPa (ksi)25°C ± 3°CASTM D790
Dimensional Stability (MD, CMD)-0.37, -0.67mm/m4 hr at 105°CIPC-TM-650 2.4.39a
Physical Properties
FlammabilityV-0-C48/23/50 & C168/70UL 94
Moisture Absorption0.02%E1/105 + D24/23IPC TM-650 2.6.2.1
Density2.17g/cm³C-24/23/50ASTM D792
Specific Heat Capacity0.61J/g·°K2 hours at 105°CASTM E2716
NASA Outgassing
Total Mass Lost0.02%-ASTM E595
Collected Volatiles0.00%-ASTM E595

可选规格

  • Standard Thicknesses:
  • 0.0051" (0.130 mm) ± 0.0005"
  • 0.0094" (0.239 mm) ± 0.0007"
  • 0.020" (0.508 mm) ± 0.0010"
  • 0.030" (0.762 mm) ± 0.0010"
  • Standard Panel Sizes:
  • 18" x 12" (457 x 305 mm)
  • 18" x 24" (457 x 610 mm)
  • Standard Claddings:
  • Electrodeposited Copper Foil:
  • ½ oz (18µm)
  • 1 oz (35µm)
  • Reverse Treated Electrodeposited Copper Foil:
  • ½ oz (18µm)
  • 1 oz (35µm)
  • Additional claddings (including rolled copper, resistor foil, and more), thicknesses, and panel sizes available upon request.

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com