6 层混合 RO4350B + IT180 电路板,含盲孔与沉金,适用于通信与微波应用
(PCBs are custom-made products; the images and parameters shown are for reference only)
产品简介
This 6-layer hybrid printed circuit board combines Rogers RO4350B high-frequency material with IT180 FR-4 material to achieve optimal signal integrity and mechanical stability. The RO4350B core is used for the top high-frequency signal layers, while IT180 provides a cost-effective solution for the remaining layers. Blind via technology enables high-density interconnections between selected layers.
RO4350B is a ceramic-filled hydrocarbon laminate designed for high-frequency applications. It offers a stable dielectric constant of 3.48 ± 0.05 at 10GHz and a low dissipation factor of 0.0037, making it ideal for RF and microwave circuits. The material features a high glass transition temperature (>280°C) and is compatible with standard FR-4 processing, including standard drilling, plating, and routing techniques.
IT180 is a high-performance FR-4 material with a glass transition temperature (Tg) of 170°C. It provides excellent thermal reliability and mechanical stability for multilayer PCB constructions. IT180 is compatible with standard FR-4 processing and is commonly used as a cost-effective core and prepreg material in hybrid PCB designs.
技术特性与优势
- Stable dielectric constant (DK 3.48 ± 0.05 @ 10GHz) over a broad frequency range for consistent impedance control
- Low dissipation factor (Df 0.0037 @ 10GHz) for minimal signal loss in high-frequency applications
- High Tg >280°C (RO4350B) and Tg 170°C (IT180) for excellent thermal reliability
- Blind via technology enables higher routing density and HDI designs
- Mixed material construction optimizes cost and performance trade-offs
- UL 94 V-0 flammability rating for safety compliance
- Lead-free assembly compatible
- ISO9001, ISO14001, IATF16949, UL Certified facility
产品图片
规格参数
| Base material (L1-L2) | Rogers RO4350B 0.203mm (8mil) core, DK 3.48 ± 0.05 @ 10GHz |
| Prepreg (L2-L3) | IT180 0.100mm |
| Core (L3-L4) | IT180 0.150mm |
| Prepreg (L4-L5) | IT180 0.100mm |
| Core (L5-L6) | IT180 0.150mm |
| Layer count | 6-layer |
| Finished board thickness | 1.70mm |
| Finished Cu weight | All layers: 35μm (1 oz) |
| Blind vias | Yes (L1-L2) |
| Surface finish | ENIG (Immersion Gold) |
| Top Solder Mask | Green |
| Bottom Solder Mask | Green |
| Top Silkscreen | White |
| Bottom Silkscreen | White |
| Quality standard | IPC-6012 Class 2 |
| 100% Electrical test | Used prior to shipment |
| Base Material | RO4350B 0.203mm + IT180 (0.100mm + 0.150mm + 0.100mm + 0.150mm) |
| Layer Count | 6 layers |
| Board Dimensions | As per design specification |
| Finished Board Thickness | 1.70mm |
| Finished Cu Weight | All layers: 35μm (1 oz) |
| Surface Finish | ENIG (Immersion Gold) |
| Solder Mask / Legend | Green / White (both sides) |
| Blind Via | Yes (L1-L2) |
| Standard | IPC 6012 Class 2 |
| 100% Electrical Test | Used prior to shipment |
叠层结构
The stack-up consists of the following layer configuration:
- Layer 1 (Top):Copper 35μm (1oz) – Signal
- Dielectric:RO4350B 0.203mm (8mil) – DK 3.48 ± 0.05
- Layer 2:Copper 35μm (1oz) – Ground
- Prepreg:IT180 0.100mm
- Layer 3:Copper 35μm (1oz) – Signal
- Core:IT180 0.150mm
- Layer 4:Copper 35μm (1oz) – Power
- Layer 5:Copper 35μm (1oz) – Ground
- Dielectric:IT180 0.150mm
- Layer 6 (Bottom):Copper 35μm (1oz) – Signal
应用领域
- Telecommunications infrastructure
- High-speed digital systems
- Microwave and RF circuits
- Base station antennas
- Radar systems
- Satellite communication equipment
材料参数
RO4350B Typical Properties
| Property | RO4350B | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.48 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.66 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0037 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +50 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.2 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 5.7 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.05 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.69 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 10 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 12 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 32 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 5.0 (0.88) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.9 | — | g/cm³ | — | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
质量保证
- Type of artwork supplied: Gerber RS-274-X
- Accepted standard: IPC-6012 Class 2
- Availability: Worldwide
- 100% Electrical test prior to shipment
- ISO 9001:2015 & UL certified facility
RO4350B 与 IT180 混压线路加工指南
Storage: Fully clad RO4350B laminates should be stored at room temperature (between 50-90°F/10-32°C). A first-in-first-out inventory system is recommended.
Inner Layer Preparation: RO4350B laminates are compatible with many pinned and pinless tooling systems. Surface preparation for photoresist processing can be done using chemical or mechanical processes. Thinner cores should be prepared using a chemical process consisting of cleaning, micro-etching, water rinsing, and drying steps.
Drilling Considerations: Standard entry (aluminum or thin pressed phenolic) and exit (pressed phenolic or fiber board) materials can be used. Drilling speeds greater than 500 surface feet per minute (SFM) should be avoided. Chip loads greater than 0.002"/rev are recommended for mid-range and large diameter tools.
RO4350B 推荐钻孔参数
| Parameter | Recommended Range |
| Surface Speed | 300-500 SFM (90 to 150m/min) |
| Chip Load | 0.002"-0.004"/rev (0.05-0.10mm) |
| Retract Rate | 500 IPM for tools <0.0135, 1,000 IPM for all others |
| Tool Type | Standard carbide |
| Tool Life | 2,000-3,000 hits |
PTH Processing: RO4350B materials do not require special treatments prior to metallization and are compatible with electroless copper processing. Desmear is typically not required as the high glass transition temperature (>280°C) minimizes smear occurrence.
Routing: RO4350B laminates are routed using carbide tools and conditions typical to processing traditional epoxy/glass materials. Copper should be etched away from the routing path to prevent burring.
