BICHENGPCBBicheng Technologies Limited

面向 5G 天线与雷达应用的 Wangling TF600 2 层 0.7mm 沉金电路板

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

TF600 is a thermosetting high-frequency laminate composed of modified PTFE resin and micron-sized ceramic fillers, featuring excellent microwave performance and temperature resistance, balancing ultra-low dielectric loss, stable DK consistency and FR4-compatible processing (drilling, plating, lamination). It supports 260℃ lead-free assembly. With excellent thermal stability and moisture resistance, it's ideal for high-reliability RF/microwave designs where low insertion loss and signal integrity are critical. It contains no glass fiber cloth.

This 2-layer rigid PCB is constructed entirely with TF600 as the core material, providing exceptional signal integrity, low insertion loss, and thermal stability for demanding RF, microwave, and 5G/6G applications.

Dielectric Constant (DK): 6.0 ± 0.15 at 10GHz (core for high-frequency impedance matching)

Dissipation Factor (Df): 0.0025 at 10GHz (ultra-low loss for signal integrity)

Thermal resistance: T260 >60 minutes, T288 >20 minutes (lead-free assembly compliant)

Peel strength (Min.): 0.80 N/mm (≈9.2 lbs/inch) for 1OZ ED Copper

CTE: X=14-16 ppm/℃, Y=12-14 ppm/℃, Z=40-45 ppm/℃ (dimensional stability)

Moisture Absorption (Max.): 0.06% (low water uptake for reliability)

High CAF resistance and chemical corrosion resistance

Thermal Conductivity: 0.60 W/m·K (efficient heat dissipation)

Ultra-low dielectric loss for excellent signal integrity

Stable DK consistency across frequency and temperature

FR4-compatible processing (drilling, plating, lamination)

Excellent thermal stability and moisture resistance

No glass fiber cloth – homogeneous dielectric properties

Efficient heat dissipation for high-power applications

Copper_layer_1 – 35 μm TF600 – 0.635 mm (25 mil) Copper_layer_2 – 35 μm

Components: 43 Total Pads: 61 Thru Hole Pads: 32 Top SMT Pads: 29 Bottom SMT Pads: 0 Vias: 34 Nets: 2

Radar Systems (Automotive ADAS, Aerospace)

Test & Measurement Equipment (Vector Network Analyzers)

Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide

9.TF600 Ceramic-Filled PTFE High-Frequency Laminate – Product Introduction

This product is composed of PTFE resin material with excellent microwave performance and temperature resistance, compounded with ceramics. The material contains no glass fiber cloth. The dielectric constant is precisely adjusted by controlling the ratio between ceramic and PTFE resin. The production process is special, resulting in excellent dielectric properties and high reliability.

TF refers to unclad smooth surface material, TF-1 refers to single-sided copper clad material, and TF-2 refers to double-sided copper clad material.

Dielectric constant range from 3 to 16 with stable performance. Common dielectric constants include 3.0, 6.0, 9.2, 9.6, 10.2, 16. Low dielectric loss.

Suitable for microwave and millimeter wave printed circuit board fabrication.

Long-term operating temperature is higher than TP materials, can be used long-term in the range of -80℃ to +200℃.

Thickness available from 0.635mm to 2.5mm.

Easy to process using standard thermoplastic material processing methods.

13.Standard Thicknesses, Panel Sizes & Claddings

应用领域

  • Dissipation Factor (Df): 0.0025 at 10GHz (ultra-low loss for signal integrity)
  • Tg: >280℃ (DSC, high thermal stability)
  • Peel strength (Min.): 0.80 N/mm (≈9.2 lbs/inch) for 1OZ ED Copper
  • CTE: X=14-16 ppm/℃, Y=12-14 ppm/℃, Z=40-45 ppm/℃ (dimensional stability)
  • Moisture Absorption (Max.): 0.06% (low water uptake for reliability)
  • UL 94-V0 flammability rating
  • High CAF resistance and chemical corrosion resistance
  • Thermal Conductivity: 0.60 W/m·K (efficient heat dissipation)
TF600 PCB 25mil ENIG
CCL 110 TF600

规格参数

Base materialTF600
Layer count2 layers
Board dimensions78mm x 65mm = 1PCS, +/- 0.15mm
Minimum Trace/Space5/6 mils
Minimum Hole Size0.35mm
Blind viasNo
Finished board thickness0.7mm
Finished Cu weight1 oz (1.4 mils) outer layers
Via plating thickness20 μm
表面处理ENIG
Top SilkscreenBlack
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Copper filling viasOn designated IC Pad
100% Electrical testUsed prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com