BICHENGPCBBicheng Technologies Limited

Wangling F4BME217 2 层 1.3mm 裸铜电路板 — 微波与射频应用

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

起订量
1PCS
交期
7-10 working days
包装
Vacuum / Anti-static Packaging
付款方式
T/T, Paypal

产品简介

1. Introduction to Wangling F4BME217 PCB

Wangling's F4BME217 is a high-performance PTFE composite laminate engineered for demanding RF and microwave applications. Precision-formulated from woven fiberglass cloth, PTFE resin, and film, it delivers superior, consistent electrical properties.

This next-generation material significantly outperforms its predecessor, F4B220, offering lower dielectric loss, higher insulation resistance, and enhanced stability. It serves as a reliable, high-performance domestic substitute for comparable imported laminates.

F4BME217 is clad with Reverse-Treated Foil (RTF) copper. This configuration provides superior low-PIM performance, enables more precise etching for fine-line circuits, and reduces conductor loss, making it ideal for high-precision designs.

This 2-layer rigid PCB is constructed entirely with Wangling F4BME217 as the core material, making it ideal for demanding microwave, RF, radar, and satellite communication applications.

2. Key Features of Wangling F4BME217 PCB

Dielectric constant of 2.17 at 10 GHz (Dk range 2.17 to 3.0 available, customizable)

Low dissipation factor of 0.001 at 10 GHz and 0.0014 at 20 GHz

Low PIM value of ≤ -159 dBc (F4BME with RTF copper)

High electrical strength of >23 KV/mm (Z direction)

Anti-radiation and low outgassing properties

Wide operating temperature range: -55°C to +260°C

Low dielectric loss for high-frequency performance

High insulation resistance and enhanced stability

Superior low-PIM performance with RTF copper

More precise etching for fine-line circuits

Low thermal expansion coefficient and reduced temperature drift

Cost-effective domestic substitute for imported laminates

4.Wangling F4BME217 PCB Construction Details

5. PCB Stackup (2-Layer Rigid Structure)

Satellite communication and base station antennas

Type of artwork supplied: Gerber RS-274-X

9. Wangling F4BME217 Low-Loss PTFE Composite – Product Introduction

F4BME217 is a high-performance PTFE composite laminate engineered for demanding RF and microwave applications. Precision-formulated from woven fiberglass cloth, PTFE resin, and film, it delivers superior, consistent electrical properties. This next-generation material significantly outperforms its predecessor, F4B220, offering lower dielectric loss, higher insulation resistance, and enhanced stability. It serves as a reliable, high-performance domestic substitute for comparable imported laminates.

The electrical and mechanical properties of F4BME217 are precisely tuned by adjusting the ratio of PTFE to fiberglass cloth within the composite. This allows for controlled dielectric constants while maintaining low loss characteristics and enhanced dimensional stability. A higher dielectric constant is achieved by increasing the fiberglass content, which improves dimensional stability, lowers the thermal expansion coefficient, and reduces temperature drift. This adjustment involves a balanced trade-off, as a higher fiberglass ratio may result in a marginal increase in dielectric loss.

13. Standard Thicknesses, Panel Sizes & Claddings

Standard Thicknesses (Dielectric thickness or total thickness with copper, customer must specify)

F4BME (RTF copper): 0.5 oz (0.018 mm), 1 oz (0.035 mm)

300 x 250 mm, 350 x 380 mm, 500 x 500 mm, 840 x 840 mm, 1000 x 1500 mm

Metal-Backed Options (Aluminum or Copper Base)

Models: F4BME217-AL (aluminum base), F4BME217-CU (copper base)

Wangling F4BME217 2-Layer Bare Copper PCB
CCL (3) F4BME217

规格参数

Base materialWangling F4BME217 (PTFE + woven fiberglass)
Copper foil typeReverse-Treated Foil (RTF)
Layer countDouble sided
Board dimensions102mm x 83mm = 1 PCS, +/- 0.15mm
Minimum Trace/Space5/6 mils
Minimum Hole Size0.25mm
Blind viasNo
Finished board thickness1.3mm
Finished Cu weight1 oz (1.4 mils) outer layers
Via plating thickness20 μm
表面处理Bare copper
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com