BICHENGPCBBicheng Technologies Limited

TSM-DS3 2 层 0.8mm 电路板 — 低损耗陶瓷填充 30mil 芯板、沉金

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

TSM-DS3 is a ceramic-filled reinforced material with very low fiberglass content (~5%) that rivals epoxies in fabricating large-format complex multilayers. It is a thermally stable, industry-leading low-loss core (Df = 0.0011 at 10 GHz) that can be manufactured with the predictability and consistency of the best fiberglass-reinforced epoxies. TSM-DS3 was developed for high-power applications (TC = 0.65 W/m·K) where it is necessary for the dielectric material to conduct heat away from other heat sources in a PWB design. It also features very low coefficients of thermal expansion for demanding thermal cycling environments.

Dielectric constant of 3.0 with tight tolerance ±0.05 at 10 GHz/23°C Dissipation factor of 0.0014 at 10GHz High thermal conductivity (unclad): 0.65 W/m·K Low moisture absorption: 0.07% Matched to copper CTE: X-axis 10 ppm/°C, Y-axis 16 ppm/°C, Z-axis 23 ppm/°C

Low fiberglass content (~5%) Dimensional stability rivals epoxy Enables large-format, high-layer-count PCBs Supports complex PCB builds with high yield, consistency, and predictability Temperature-stable Dk (±0.25% from -30°C to 120°C) Compatible with resistive foils

5. PCB Stackup (2-Layer Rigid Structure)

Copper_layer_1 - 35 μm TSM-DS3 - 0.762 mm (30 mil) Copper_layer_2 - 35 μm

Components: 42Total Pads: 114Thru Hole Pads: 78Top SMT Pads: 36Bottom SMT Pads: 0Vias: 51Nets: 2

CouplersPhased array antennasRadar manifoldsmmWave antenna/automotive systemsOil drilling equipmentSemiconductor/ATE testing

Artwork Format: Gerber RS-274-XAccepted Standard: IPC-Class-2Availability: Worldwide

TSM-DS3 PCB

规格参数

Base MaterialTSM-DS3
Layer Count2-layer
Board Dimensions68mm × 126mm (±0.15mm)
Min. Trace/Space5 mil / 5 mil
Min. Hole Size0.3 mm
Blind ViasNo
Finished Board Thickness0.8 mm
Finished Cu Weight (Outer)1 oz
Via Plating Thickness20 μm
表面处理Immersion Gold
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskGreen
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com