BICHENGPCBBicheng Technologies Limited

面向毫米波应用的 TLY-3 2 层 20mil 银金电路板

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

TLY-3 laminates are manufactured with very lightweight woven fiberglass and are much more dimensionally stable than chopped fiber reinforced PTFE composites. The woven matrix in the TLY-3 material yields a more mechanically stable laminate that is suitable for high volume manufacturing. The low dissipation factor enables successful deployment for automotive radar applications designed at 77 GHz as well as other antennas in millimeter wave frequencies.

Comparative OEM testing at 77 GHz of lightly reinforced TLY-3 vs. its closest chopped fiber reinforced competitor has shown "drop in"/equivalent insertion losses/dielectric properties. The primary benefit is much higher manufacturing yields. The dielectric constant range is 2.17 to 2.40. For most thicknesses, the dielectric constant can be specified anywhere within this range with a tolerance of +/-0.02. In the low dielectric constant range, the dissipation factor is approximately 0.0009 at 10 GHz. Typical applications include satellite communications, automotive radar, filters, couplers, avionics and phased array antennas.

Ultra-Low Dielectric Constant: 2.33 ±0.02 at 10GHz Exceptional Signal Integrity: Dissipation Factor of 0.0012 at 10GHz Thermal Management: Thermal Conductivity of 0.22 W/mk (Unclad) Dimensional Stability: x CTE 26 ppm/°C, y CTE 15 ppm/°C, z CTE 217 ppm/°C Strong Bonding: Peel Strength 0.5oz 11 lbs/in, 1oz 17 lbs/in Environmental Resistance: Low Moisture Absorption of 0.02% Safety Certified: Flammability Rating of V-0 Space Qualified: Outgassing TML 0.01%, CVCM 0.01%, WVR 0.01%

Manufacturing Excellence: Dimensionally Stable for high volume production Superior RF Performance: Lowest Df for millimeter wave applications Mechanical Reliability: High Peel Strength Environmental Durability: Low Moisture Absorption Consistent Performance: Uniform, Consistent Dk Advanced Processing: Laser Ablatable for precision manufacturing

5. PCB Stackup (2-Layer Rigid Structure)

Copper Layer 1 - 35μm (1oz) TLY-3 Core - 20mil (0.508mm) Copper Layer 2 - 35μm (1oz)

Components: 25Total Pads: 86Thru Hole Pads: 64Top SMT Pads: 22Bottom SMT Pads: 0Vias: 31Nets: 2

Automotive Radar (77GHz)Satellite/Cellular CommunicationsPower AmplifiersLNBs, LNAs, LNCsAerospace SystemsKa, E and W band Applications

Artwork Format: Gerber RS-274-XAccepted Standard: IPC-Class-2Availability: Worldwide

TLY-3 PCB

规格参数

Base MaterialTLY-3
Layer Count2-layer
Board Dimensions125mm × 47mm = 1PC, ±0.15mm
Minimum Trace/Space4/6 mils
Minimum Hole Size0.3mm
Blind ViasNo
Finished Board Thickness0.6mm
Finished Cu Weight1oz (1.4 mils)
Via Plating Thickness20 μm
表面处理Silver plate / gold plate (Gold over silver)
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com