Taconic TLX-9 2 层 0.3mm EPIG(无镍)电路板 — 低 Dk 射频应用
定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。
- 起订量
- 1PCS
- 交期
- 7-10 working days
- 包装
- Vacuum / Anti-static Packaging
- 付款方式
- T/T, Paypal
产品简介
TLX-9 is a composite of PTFE/woven glass laminates with exceptionally well controlled electrical and mechanical properties. TLX-9 laminates can be sheared, drilled, milled and plated using standard methods for PTFE/woven fiberglass materials. The laminates are dimensionally stable, and exhibit virtually no moisture absorption during fabrication processes.
TLX-9 measured 2.5 Dk with tightly controlled across a broad frequency range and temperature spectrum. The dissipation factor is approximately 0.0019 when measured at 10 GHz. TLX-9 meets stringent flammability standards, achieving a UL 94 V-0 certification for flame retardancy.
This 2-layer rigid PCB is constructed entirely with Taconic TLX-9 as the core material, making it ideal for LNAs, LNBs, LNCs, PCS/PCN large format antennas, high power amplifiers, and passive components.
Flexural strength lengthwise: >23,000 lbs/in (>159 N/mm²)
Flexural strength crosswise: >19,000 lbs/in (>131 N/mm²)
Peel strength (1 oz copper): 12 lbs/linear in (2.1 N/mm)
Controlled coefficient of thermal expansion (CTE)
Exceptionally well controlled electrical and mechanical properties
4.Taconic TLX-9 PCB Construction Details
5. PCB Stackup (2-Layer Rigid Structure)
Type of artwork supplied: Gerber RS-274-X
9. Taconic TLX-9 PTFE/Woven Glass Laminate – Product Introduction
Taconic has over 35 years of experience coating fiberglass fabric with PTFE (polytetrafluoroethylene). This enables Taconic to manufacture copper clad PTFE/woven glass laminates with exceptionally well controlled electrical and mechanical properties.
The dielectric constant (Dk) range is 2.45 to 2.65. The Dk can be specified anywhere within this range with a tolerance of ±0.04. The dissipation factor is approximately 0.0019 when measured at 10 GHz.
TLX laminates can be sheared, drilled, milled and plated using standard methods for PTFE/woven fiberglass materials. The laminates are dimensionally stable, and exhibit virtually no moisture absorption during fabrication processes.
TLX laminates are generally ordered clad on one or both sides with 1/2, 1, or 2 oz. electrodeposited copper. Contact customer service for alternate claddings.
TLX laminates are tested in accordance with IPC-TM 650. A Certificate of Compliance containing actual test data accompanies each shipment.
13. Standard Thicknesses, Panel Sizes & Claddings
Standard Electrodeposited Copper Claddings
