Rogers RT/duroid 5880 + 高 Tg FR-4 4 层混合电路板,含阶梯腔体与沉金
定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。
- 起订量
- 1PCS
- 交期
- 7-10 working days
- 包装
- Vacuum / Anti-static Packaging
- 付款方式
- T/T, Paypal
产品简介
RT/duroid 5880 is a glass microfiber-reinforced PTFE composite developed by Rogers Corporation, specifically designed for high-frequency and broadband applications requiring ultra-low dielectric loss . The material features randomly oriented microfibers that provide mechanical reinforcement while maintaining exceptional electrical uniformity. With the lowest electrical loss among reinforced PTFE materials, RT/duroid 5880 is ideal for precision stripline and microstrip circuit applications . The material is resistant to solvents and reagents used in etching and plating processes, and performs exceptionally well in high-moisture environments .
2. RT/duroid 5880 Key Features and Benefits
Ultra-low Dk 2.20 ± 0.02 at 10 GHz ensures consistent impedance control with tight tolerance Extremely low Df 0.0009 at 10 GHz minimizes signal loss for critical RF and microwave circuits Isotropic dielectric constant provides uniform electrical properties in all directions Low moisture absorption 0.02% maintains stable electrical performance in humid environments Thermal conductivity 0.20 W/m/°K enables effective heat dissipation CTE X:31 ppm/°C, Y:48 ppm/°C, Z:237 ppm/°C UL 94 V-0 rated for safety compliance Low outgassing characteristics suitable for space and aerospace applications Excellent chemical resistance withstands etching and plating solutions Well-established material with proven reliability in high-frequency designs
A hybrid PCB (or mixed-pressure PCB) is a multilayer circuit board that combines two or more different material types within a single lamination structure.This approach allows designers to optimize electrical performance, thermal management, and cost by using specialized materials only where needed.
Material diversity: Combines high-frequency materials (e.g., RT/duroid 5880, RO4000 series) with standard materials (e.g., FR-4) to balance performance and cost Selective performance optimization: RF/microwave sections use low-loss materials while digital/power sections use economical FR-4 Signal integrity enhancement: Proper material selection reduces signal distortion and interference in mixed-signal designs Thermal management integration: High-thermal-conductivity materials can be placed strategically for heat dissipation
Hybrid PCBs require careful material matching to address differences in CTE, which can cause warpage or delamination during thermal cycling.PTFE-based materials like RT/duroid 5880 require special surface activation for reliable plated through-holes, typically using sodium etch or plasma treatment.The Z-axis CTE of RT/duroid 5880 (237 ppm/°C) is significantly higher than FR-4, creating potential reliability concerns for plated through-holes, especially when the total PTFE thickness exceeds 20 mils . Specialized bondply materials and controlled lamination parameters are essential for successful hybrid construction.
5. PCB Stackup (4-Layer Rigid Structure)
L1 (Top): 1oz Copper Core 1: RT/duroid 5880, 1.575mm L2: 0.5oz Copper Prepreg: 2116 (RC53%) × 2 sheets, total 0.24mm Core 2: High Tg 170°C FR-4, 0.5mm L3: 0 copper (Note: Stackup shows 0 thickness) L4 (Bottom): 1oz Copper
Commercial Airborne Antennas and broadband communication systems Microstrip and Stripline Circuits for precision RF designs Millimeter Wave Applications including 5G/6G infrastructure Radar Systems for defense and automotive applications Guidance Systems and aerospace navigation equipment Point-to-Point Digital Radio Antennas for backhaul networks Satellite Communications requiring low outgassing materials Test and Measurement Equipment for high-frequency signal analysis
Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide
