BICHENGPCBBicheng Technologies Limited

Rogers RO4350B LoPro 2 层 0.2mm 沉金电路板 — 射频与高速数字应用

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

起订量
1PCS
交期
7-10 working days
包装
Vacuum / Anti-static Packaging
付款方式
T/T, Paypal

产品简介

1. Introduction to Rogers RO4350B LoPro PCB

RO4350B LoPro laminates use a proprietary Rogers technology that allows reverse treated foil to bond to standard RO4350B dielectric. This results in a laminate with low conductor loss for improved insertion loss and signal integrity while maintaining the other desirable attributes of the standard RO4350B laminate system. RO4350B hydrocarbon ceramic laminates are designed to offer superior high frequency performance and low cost circuit fabrication. The result is a low loss material which can be fabricated using standard epoxy/glass (FR-4) processes and does not require specialized via preparation such as sodium etch for lower manufacturing cost.

The selection of laminates typically available to designers is significantly reduced once operational frequencies increase to 500 MHz and above. RO4000 material possesses the properties needed by designers of RF microwave circuits, matching networks, and controlled impedance transmission lines. Low dielectric loss allows RO4000 series material to be used in many applications where higher operating frequencies limit the use of conventional circuit board laminates. The temperature coefficient of dielectric constant is among the lowest of any circuit board material and the dielectric constant is stable over a broad frequency range, making it an ideal substrate for broadband applications.

This 2-layer rigid PCB is constructed entirely with Rogers RO4350B LoPro as the core material, making it ideal for demanding RF, cellular base station, high-speed digital, and satellite communication applications.

2. Key Features of Rogers RO4350B LoPro PCB

Dielectric constant of 3.48 ± 0.05 at 10 GHz/23°C

Dissipation factor of 0.0037 at 10 GHz/23°C

Td > 390°C, high Tg greater than 280°C (TMA)

High thermal conductivity of 0.69 W/(m·K)

Copper-matched CTE: X-axis 10 ppm/°C, Y-axis 12 ppm/°C (-55°C to 288°C)

Lower insertion loss allows for higher operating frequency designs (even greater than 40 GHz)

Reduced passive inter-modulation (PIM) for base station antennas

Improved thermal performance due to lower conductor loss

Can be fabricated using standard FR-4 processes without specialized via preparation

Excellent dimensional stability with CTE similar to copper

Reliable plated through-hole quality even in severe thermal shock applications

4. Rogers RO4350B LoPro PCB Construction Details

5. PCB Stackup (2-Layer Rigid Structure)

Rogers RO4350B LoPro Substrate - 4 mil (0.102 mm)

Digital applications such as servers, routers, and high speed back planes

Cellular base station antennas and power amplifiers

RF microwave circuits and matching networks

Type of artwork supplied: Gerber RS-274-X

9. Rogers RO4350B LoPro Hydrocarbon Ceramic Laminate – Product Introduction

RO4350B LoPro laminates use a proprietary Rogers technology that allows reverse treated foil to bond to standard RO4350B dielectric. This results in a laminate with low conductor loss for improved insertion loss and signal integrity while maintaining all other desirable attributes of the standard RO4000 laminate system. RO4000 hydrocarbon ceramic laminates are designed to offer superior high frequency performance and low cost circuit fabrication. The result is a low loss material which can be fabricated using standard epoxy/glass (FR-4) processes offered at competitive prices.

The selection of laminates typically available to designers is significantly reduced once operational frequencies increase to 500 MHz and above. RO4000 material possesses the properties needed by designers of RF microwave circuits and matching networks and controlled impedance transmission lines. Low dielectric loss allows RO4000 series material to be used in many applications where higher operating frequencies limit the use of conventional circuit board laminates. The temperature coefficient of dielectric constant is among the lowest of any circuit board material and the dielectric constant is stable over a broad frequency range. This makes it an ideal substrate for broadband applications.

RO4000 material's thermal coefficient of expansion (CTE) provides several key benefits to the circuit designer. The expansion coefficient of RO4000 material is similar to that of copper which allows the material to exhibit excellent dimensional stability, a property needed for mixed dielectric multilayer boards constructions. The low Z-axis CTE of RO4000 laminates provides reliable plated through-hole quality, even in severe thermal shock applications. RO4000 series material has a Tg of >280°C (536°F) so its expansion characteristics remain stable over the entire range of circuit processing temperatures.

RO4000 series laminates can easily be fabricated into printed circuit boards using standard FR-4 circuit board processing techniques. Unlike PTFE based high performance materials, RO4000 series laminates do not require specialized via preparation processes such as sodium etch. This material is a rigid, thermoset laminate that is capable of being processed by automated handling systems and scrubbing equipment used for copper surface preparation.

13. Standard Thicknesses, Panel Sizes & Claddings

LoPro Reverse Treated Electrodeposited Copper Foil: ½ oz (18 μm), 1 oz (35 μm)

Bow and Twist: Outgoing inspection criteria for flatness is <6% Bow and <6% Twist

Electrical Strength: 4 mil dielectric thickness can withstand 1,500 volts without dielectric breakdown

Dimensional Stability: Negative nominal value of approximately -0.5 mm/m in both MD and CMD directions

Dielectric Constant: LoPro resin layer is a significant volumetric portion of the overall dielectric, design Dk will be different than thicker constructions

RO4350B LoPro PCB 4mil Immersion Gold
CCL 84 RO4350B LoPro

规格参数

Base materialRogers RO4350B LoPro
Copper foil typeLoPro Reverse Treated Electrodeposited Copper Foil
Layer count2-Layer
Board dimensions78mm x 101mm = 1 PCS
Minimum Trace/Space5/6 mils
Minimum Hole Size0.25mm
Blind viasNo
Finished board thickness0.2mm
Finished Cu weight1 oz (1.4 mils) outer layers
Via plating thickness20 μm
表面处理Immersion Gold
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskBlue
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com