BICHENGPCBBicheng Technologies Limited

Rogers RO4003C LoPro 2 层 16.7mil 低损耗电路板,ENEPIG 表面处理

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

起订量
1PCS
交期
5-9 working days
包装
Vacuum / Anti-static Packaging
付款方式
T/T, Paypal

产品简介

RO4003C LoPro laminates use a proprietary Rogers' technology that allows reverse treated foil to bond to standard RO4003C dielectric. This results in a laminate with low conductor loss for improved insertion loss and signal integrity while maintaining the other desirable attributes of the standard RO4003C laminate system. RO4003C hydrocarbon ceramic laminates are designed to offer superior high frequency performance and low cost circuit fabrication. The result is a low loss material which can be fabricated using standard epoxy/glass (FR-4) processes and do not require specialized via preparation such as sodium etch for lower manufacturing cost.

Dielectric constant of 3.38 +/- 0.05 at 10 GHz/23°C Dissipation factor of 0.0027 at 10 GHz/23°C Td > 425°C, High Tg greater than 280°C TMA High Thermal Conductivity of 0.64 W/mK Low Z-axis coefficient of thermal expansion at 46 ppm/°C Copper matched Coefficient of Thermal Expansion (-55 to 288°C): X axis 11 ppm/°C, Y axis 14 ppm/°C Lead free Process Compatible

Lower insertion loss allows for higher operating frequency designs (even greater than 40 GHz) Reduced passive inter-modulation (PIM) for base station antennas Improved thermal performance due to lower conductor loss Multilayer PCB capability Design flexibility High temperature processing compatibility Meets environmental concerns CAF resistant Standard epoxy/glass (FR-4) fabrication processes without specialized via preparation

Copper layer 1 – 35 μm Rogers RO4003C LoPro Substrate – 0.424 mm (16.7mil) Copper layer 2 – 35 μm

Components: 56 Total Pads: 102 Thru Hole Pads: 75 Top SMT Pads: 27 Bottom SMT Pads: 0 Vias: 49 Nets: 2

Digital applications such as servers, routers, and high speed back planes Cellular base station antennas and power amplifiers LNB's for direct broadcast satellites RF Identification Tags

Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide

Rogers RO4003C LoPro 2-Layer PCB

规格参数

Base MaterialRO4003C Low Profile
Layer CountDouble-Layer
Board Dimensions104.3mm × 78.65mm
Minimum Trace/Space4/6 mils
Minimum Hole Size0.4mm
Blind ViasNo
Finished Board Thickness0.5mm
Finished Cu Weight (Outer Layers)1 oz (1.4 mils)
Via Plating Thickness20 μm
表面处理ENEPIG
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskGreen
Bottom Solder MaskNo
Electrical Test100% prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com