面向高频多层应用的 Rogers RO4003C 5.05mm 8 层电路板,沉金
定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。
- 起订量
- 1PCS
- 交期
- 8-12 working days
- 包装
- Packing (Anti-static / Vacuum)
- 付款方式
- T/T, Paypal
产品简介
RO4003C is a high-performance hydrocarbon ceramic laminate developed by Rogers Corporation, specifically designed for RF and microwave applications. It offers a unique combination of low loss, stable electrical properties, and standard epoxy/FR-4 fabrication processes. Unlike traditional PTFE-based materials, RO4003C does not require specialized plasma treatment or sodium etch for through-hole preparation, making it cost-effective and manufacturing-friendly. The material features a glass transition temperature above 280°C and exceptional thermal reliability, making it suitable for multilayer constructions with lead-free assembly processes.
Stable Dk 3.38 ± 0.05 at 10 GHz ensures consistent impedance control across frequency and temperature Low Df 0.0027 at 10 GHz minimizes signal loss for high-frequency circuits Tg >280°C and Td 425°C provide excellent thermal reliability for lead-free assembly CTE 14-16 ppm/°C (X/Y) matches copper for superior dimensional stability in multilayer designs Moisture absorption only 0.06% maintains electrical performance in humid environments UL 94 V-0 rated for safety compliance Compatible with standard epoxy/FR-4 fabrication eliminates need for plasma treatment, reducing manufacturing cost Cost-effective alternative to PTFE materials enables high-volume commercial applications Proven reliability in wireless communications, automotive radar, and aerospace systems
3. RO4003C Multilayer Processing Guidelines
Based on Rogers' fabrication guidelines for RO4000 series laminates, the following key processing considerations apply to this 8-layer construction:
RO4003C cores are compatible with both pinned and pinless tooling systems. Slotted pins and multiline tooling formats are recommended for optimal registration. Copper surfaces can be prepared using chemical or mechanical processes. Thinner cores should use chemical cleaning with micro-etching, while thicker cores (like the 1.524mm and 0.762mm used here) are compatible with mechanical scrub systems. RO4003C works with standard liquid and dry film photoresists and can be processed through standard develop, etch, and strip (DES) systems. Copper oxide or oxide alternative treatments are recommended for multilayer bonding preparation.
RO4003C cores bond effectively with RO4450F prepreg using standard thermoset adhesive bonding cycles. The bond cycle parameters should follow RO4400 series bondply guidelines.
Surface speed: 300-500 SFM (avoid exceeding 500 SFM) Chip load: 0.002"-0.004"/rev for mid-range and large tools; lower for small diameter drills Standard carbide tools are preferred over undercut styles Expected tool life: 2,000-3,000 hits Standard entry (aluminum) and exit (phenolic) materials can be used
Desmear is typically not required for double-sided boards due to high Tg (>280°C) Multilayer boards may require alkaline permanganate or CF4/O2 plasma desmear depending on prepreg layers Etchback of RO4003C layers is not recommended as it may loosen filler particles Material is compatible with standard electroless copper and direct metallization processes
Compatible with standard acid copper plating and electrolytic tin/tin-lead Can be processed through standard strip/etch/strip (SES) processes Post-etch surface bonds well with solder masks
Compatible with OSP, HASL, and most chemically deposited or electroplated finishes including ENIG
Use carbide multi-luted spiral or diamond cut router bits Surface speed below 500 SFM recommended Chip load: 0.0010-0.0015"/rev Copper should be etched away from routing path to prevent burring
L1 (Top): 1oz Copper (Green solder mask, no silkscreen) Core 1: RO4003C, 1.524mm L2: 0.5oz Copper Prepreg: RO4450F layers L3: 0.5oz Copper Core 2: RO4003C, 1.524mm L4: 0.5oz Copper Prepreg: RO4450F layers L5: 0.5oz CopperB Core 3: RO4003C, 0.762mm L6: 0.5oz Copper Prepreg: RO4450F layers L7: 0.5oz Copper Core 4: RO4003C, 0.762mm L8 (Bottom): 1oz Copper (Green solder mask, white silkscreen)
Wireless Communications: Base stations, antennas, power amplifiers Automotive Radar: 77GHz ADAS sensors Aerospace & Defense: Radar systems, avionics, satellite communications Test & Measurement: RF test equipment, network analyzers Broadband Systems: Microwave backhaul, satellite terminals Industrial IoT: High-frequency wireless modules and sensors
Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide
