BICHENGPCBBicheng Technologies Limited

Rogers RO3210 4 层 1.36mm 沉金/沉银电路板 — 高机械稳定性与射频应用

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

起订量
1PCS
交期
10-12 working days
包装
Vacuum / Anti-static Packaging
付款方式
T/T, Paypal

产品简介

Rogers RO3210 high frequency circuit materials are ceramic-filled laminates reinforced with woven fiberglass. These materials are engineered to offer exceptional electrical performance and mechanical stability at competitive prices. The RO3200 series was designed as an extension of the RO3000 series with one distinguishing characteristic – improved mechanical stability.

RO3210 laminates combine the surface smoothness of a non-woven PTFE laminate, for finer line etching tolerances, with the rigidity of a woven-glass PTFE laminate. These materials can be fabricated into printed circuit boards using standard PTFE circuit board processing techniques as described in Rogers' application notes.

The dielectric constant of RO3210 is 10.2 with a dissipation factor of 0.0027 at 10 GHz. This 4-layer rigid PCB is constructed with RO3210 as both top and bottom cores, bonded by RO4450F bondply, providing exceptional signal integrity, high dielectric constant, and low-loss performance for demanding RF, microwave, and millimeter wave applications.

Dielectric constant of 10.2 ± 0.50 at 10 GHz (process) / 10.8 (design)

Thermal coefficient of dielectric constant (TCDk) of -459 ppm/°C

CTE in X/Y axes of 13 ppm/°C, Z-axis of 34 ppm/°C

Improved mechanical stability vs. RO3000 series

Woven fiberglass reinforced for rigidity

Superior mechanical stability for demanding environments

Surface smoothness enables finer line etching tolerances

Combines PTFE electrical performance with woven-glass rigidity

Compatible with standard PTFE circuit board processing techniques

Stable electrical properties over wide frequency range

Reliable plated through-hole performance

Ideal for high-frequency, high-reliability applications

5. PCB Stackup (4-Layer Hybrid Rigid Structure)

Controlled Depth Slot: TOP layer to inner layer 1

High-reliability aerospace and defense electronics

Accepted standard: IPC-Class-2 (typical)

Manufactured under ISO 9002 certified quality system

Fabrication according to Rogers' application note

9. RO3210 High Frequency Laminates – Product Introduction

RO3210 high frequency circuit materials are ceramic-filled laminates reinforced with woven fiberglass. These materials are engineered to offer exceptional electrical performance and mechanical stability at competitive prices.

The RO3200 series high frequency materials were designed as an extension of the RO3000 series with one distinguishing characteristic – improved mechanical stability. RO3210 laminates combine the surface smoothness of a non-woven PTFE laminate, for finer line etching tolerances, with the rigidity of a woven-glass PTFE laminate.

The dielectric constant of RO3210 is 10.2 with a dissipation factor of 0.0027. These materials can be fabricated into printed circuit boards using standard PTFE circuit board processing techniques as described in the application note "Fabrication Guidelines for RO3000 Series High Frequency Circuit Materials."

RO3200 series laminates are manufactured under an ISO 9002 certified quality system.

Improved mechanical stability for rugged applications

Compatible with standard PTFE processing

Excellent dimensional stability (0.8 mm/m)

High dielectric constant enables circuit size reduction

13. Standard Thicknesses, Panel Sizes & Claddings

½ oz (17 μm) electrodeposited copper foil (HH/HH)

1 oz (35 μm) electrodeposited copper foil (H1/H1)

2 oz (70 μm) electrodeposited copper foil (H2/H2)

Other claddings may be available. Contact customer service.

应用领域

  • Dielectric constant of 10.2 ± 0.50 at 10 GHz (process) / 10.8 (design)
  • Dissipation factor of 0.0027 at 10 GHz
  • Thermal coefficient of dielectric constant (TCDk) of -459 ppm/°C
  • Low moisture absorption of <0.1%
  • CTE in X/Y axes of 13 ppm/°C, Z-axis of 34 ppm/°C
  • Thermal conductivity of 0.81 W/(m·K)
  • Decomposition temperature (Td) of 500°C
  • UL 94 V-0 flammability rating
  • Lead-free process compatible
  • Improved mechanical stability vs. RO3000 series
  • Woven fiberglass reinforced for rigidity
4L RO3210+RO4450F PCB
4L RO3210+RO4450F PCB STACK UP

规格参数

Base materialRO3210 (top and bottom cores) + RO4450F bondply
Layer count4 layers
Board dimensions95mm x 98mm = 1PCS
Finished board thickness1.36 mm (nominal)
Finished Cu weightOuter layers: 1 oz (35 μm)Inner layers: 0.5 oz (18 μm)
表面处理Immersion Silver + ENIG (selective)
Top solder maskGreen, white legend
Bottom solder maskGreen, no legend
Special featuresControlled depth slot (TOP to inner layer 1)Blind vias (L1-L3)
100% Electrical testUsed prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com