BICHENGPCBBicheng Technologies Limited

Rogers RO3010 2 层 50mil 高 Dk 陶瓷 PTFE 电路板,EPIG 无镍表面处理

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

Rogers RO3010 advanced circuit materials are ceramic-filled PTFE composites that offer a higher dielectric constant with excellent stability. They are competitively priced products with exceptional mechanical and electrical stability. This stability simplifies the design of broadband components and allows the materials to be used in a wide range of applications over a very broad range of frequencies. This material's characteristics make RO3010 laminates excellent for circuit miniaturization.

Dielectric constant of 10.2 +/- .30 at 10 GHz/23°C

Dissipation factor of 0.0022 at 10 GHz/23°C

Low Coefficient of Thermal Expansion (-55 to 288 °C): 13 ppm/°C (X), 11 ppm/°C (Y), 16 ppm/°C (Z)

Material exhibits dimensional stability with expansion coefficient matched to copper

Economical laminate pricing for volume manufacturing processes

Suitable for use with multi-layer board designs

Excellent for circuit miniaturization due to high dielectric constant

Stable electrical performance across wide frequency range

Copper layer 1 – 35 μm Rogers RO3010 Substrate – 1.27 mm (50mil) Copper layer 2 – 35 μm

Components: 21Total Pads: 45Thru Hole Pads: 31Top SMT Pads: 14Bottom SMT Pads: 0Vias: 29Nets: 2

Automotive radar applicationsGlobal positioning satellite antennasCellular telecommunications systems – power amplifiers and antennasPatch antenna for wireless communicationsDirect broadcast satellitesDatalink on cable systemsRemote meter readersPower backplanes

Artwork supplied: Gerber RS-274-XAccepted standard: IPC-Class-2Availability: Worldwide

8.RO3010™ High Frequency Laminate – Product Introduction

RO3010™ laminates are ceramic-filled PTFE composites designed for commercial microwave and RF applications. RO3010 laminates offer a dielectric constant of 10.2 and are an ideal solution for circuit miniaturization at a very competitive price.

RO3010 laminates have excellent mechanical properties and consistent electrical properties. This consistency greatly simplifies the design of wide bandwidth components and allows the material to be used across a broad range of frequencies. The properties of this material make it an ideal choice for circuit miniaturization.

Excellent dimensional stability, coefficient of thermal expansion matched to copper

Suitable for multi-layer board designs, can be used in hybrid constructions with different dielectric constants

Low dielectric loss, can be used in applications up to 77 GHz

12.Standard Thicknesses, Panel Sizes & Claddings

应用领域

  • Dielectric constant of 10.2 +/- .30 at 10 GHz/23°C
  • Dissipation factor of 0.0022 at 10 GHz/23°C
  • Td > 500°C
  • Thermal Conductivity of 0.95 W/mK
  • Moisture Absorption of 0.05%
  • -40°C to +85°C operation
2-Layer RO3010 PCB 50mil EPIG
CCL 129 RO3010

规格参数

Base MaterialRO3010
Layer CountDouble sided
Board Dimensions89.65mm × 94.3mm
Minimum Trace/Space5/6 mils
Minimum Hole Size0.25mm
Blind ViasNo
Finished Board Thickness1.3mm
Finished Cu Weight (Outer Layers)1 oz (1.4 mils)
Via Plating Thickness20 μm
表面处理EPIG (Nickel-free)
Top SilkscreenBlack
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com