BICHENGPCBBicheng Technologies Limited

Rogers DiClad 870 2 层 5mil 低 Dk PTFE 电路板,沉银

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

起订量
1PCS
交期
6-10 working days
包装
Vacuum / Anti-static Packaging
付款方式
T/T, Paypal

产品简介

Rogers DiClad 870 laminates are woven fiberglass reinforced, PTFE-based composites that offer lower dielectric constant for use as printed circuit board substrates. By using fewer plies of woven fiberglass and a higher ratio of PTFE content, the DiClad 870 laminates offer lower dielectric constants (Dk) and dissipation factors at a similar thickness to other laminates in the DiClad series.

DK of 2.33 at 10 GHz and 1 MHz, 50% RH Dissipation factor of 0.0013 at 10 GHz, 0.0009 at 1MHz, 50% RH TcDK of -161 ppm/°C ranging -10~140°C, 10 GHz Arc Resistance >180 seconds Moisture Absorption 0.02% CTE in X-axis of 17 ppm/°C, Y-axis of 29ppm/°C and Z-axis of 217ppm/°C Copper Peel Strength of 14 lbs/in, 10s @288°C Flammability of UL 94-V0 grade

Lowest moisture absorption among PTFE based composites Stable Dk over a wide frequency range Low Dk supports wider line widths for lower insertion loss Higher PTFE content for improved electrical performance Excellent copper peel strength for reliable assembly

Copper layer 1 – 35 μm DiClad 870 – 0.127 mm (5mil) Copper layer 2 – 35 μm

Components: 23 Total Pads: 52 Thru Hole Pads: 29 Top SMT Pads: 23 Bottom SMT Pads: 0 Vias: 19 Nets: 2

Radar Feed Networks Commercial Phased Array Networks Low Loss Base Station Antennas Guidance Systems Digital Radio Antennas Filters, Couplers, LNAs

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

Rogers DiClad 870 2-Layer PCB

规格参数

Base MaterialDiClad 870
Layer Count2-layer
Board Dimensions112mm × 68mm (±0.15mm)
Minimum Trace/Space6/7 mils
Minimum Hole Size0.25mm
Blind ViasNo
Finished Board Thickness0.2mm
Finished Cu Weight (Outer Layers)1oz (1.4 mils)
Via Plating Thickness20 μm
表面处理Immersion Silver
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com