Rogers CuClad 250 2 层 10mil 沉金电路板 — 高频微波应用
定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。
- 起订量
- 1PCS
- 交期
- 7-13 working days
- 包装
- Vacuum / Anti-static Packaging
- 付款方式
- T/T, Paypal
产品简介
1. Introduction to Rogers CuClad 250 PCB
Rogers CuClad 250 laminates are cross plied, woven fiberglass and PTFE composite laminates that offer low dielectric constants ranging from 2.40 to 2.55 at 10GHz. CuClad 250 laminates use a higher fiberglass/PTFE ratio to provide mechanical properties approaching those of conventional substrates. These laminates provide better dimensional stability and lower thermal expansion in all directions.
CuClad 250 laminates feature cross-plied construction (alternating layers of coated fiberglass plies oriented 90° to each other) which provides true electrical and mechanical isotropy in the XY plane. This 2-layer rigid PCB is constructed entirely with CuClad 250 as the core material, making it ideal for radars, microwave components (LNAs, filters, couplers), and electronic countermeasure systems.
2. Key Features of Rogers CuClad 250 PCB
Dielectric Constant: 2.40 to 2.55 at 10 GHz / 1MHz
Low outgassing: TML 0.01%, CVCM 0.0%, WVR 0.0%
Cross Plied Woven Fiberglass construction
Balanced electrical and mechanical properties
Better Dk uniformity than non-woven fiberglass reinforced laminates
Cross-plied construction provides balanced electrical and mechanical properties
Low Dk supports wider line widths for lower insertion loss
Better dielectric constant uniformity than comparable non-woven fiberglass reinforced laminates
Excellent dimensional stability and lower thermal expansion in all directions
True electrical and mechanical isotropy in the XY plane
5. PCB Stackup (2-Layer Rigid Structure)
Rogers CuClad 250 Core – 0.254 mm (10mil)
Total thickness: 0.4mm (including copper layers)
7. Rogers CuClad 250 Material – Product Introduction
CuClad® series laminates are woven fiberglass/PTFE composite materials for use as printed circuit board substrates. Using precision control of the fiberglass/PTFE ratio, CuClad laminates offer a range of choices from the lowest dielectric constant and loss tangent to a more highly reinforced laminate with better dimensional stability.
The woven fiberglass reinforcement in CuClad products provides greater dimensional stability than non-woven fiber glass reinforced PTFE based laminates of similar dielectric constants. The consistency and control of the PTFE coated fiberglass cloth allows Rogers to offer a greater variety of dielectric constants and produces a laminate with better dielectric constant uniformity than comparable non-woven fiberglass reinforced laminates. These properties make CuClad an attractive choice for filters, couplers and low noise amplifiers.
CuClad laminates are crossplied (alternating layers of coated fiberglass plies are oriented 90° to each other). This provides true electrical and mechanical isotropy in the XY plane, a feature unique to CuClad laminates. No other woven or nonwoven fiberglass reinforced PTFE based laminates make this claim.
9. CuClad 250 Typical Properties (Data Sheet)
Radars, Electronic Countermeasures, Electronic Support Measures
Microwave Components (LNAs, filters, couplers, etc.)
Type of artwork supplied: Gerber RS-274-X
12. Standard Thicknesses, Panel Sizes & Claddings
应用领域
- Dielectric Constant: 2.40 to 2.55 at 10 GHz / 1MHz
- Dissipation Factor: 0.0017 at 10 GHz
- Low Moisture Absorption: 0.03%
- Strong Peel Strength: 14 lbs/in
- Low outgassing: TML 0.01%, CVCM 0.0%, WVR 0.0%
- Cross Plied Woven Fiberglass construction
- High PTFE to Glass Ratio
- Balanced electrical and mechanical properties
- Better Dk uniformity than non-woven fiberglass reinforced laminates
- Low circuit losses at high frequency
