BICHENGPCBBicheng Technologies Limited

面向高频射频应用的 RO4350B 2 层 16.6mil ENEPIG 电路板

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

Rogers RO4350B materials are proprietary woven glass reinforced hydrocarbon/ceramics with electrical performance close to PTFE/woven glass and the manufacturability of epoxy/glass. RO4350B laminates provide tight control on dielectric constant (Dk) and maintain low loss while utilizing the same processing method as standard epoxy/glass. Available at a fraction of the cost of conventional microwave laminates, RO4350B laminates do not require the special through-hole treatments or handling procedures as PTFE based materials. These materials are UL 94 V-0 rated for active devices and high power RF designs.

RO4350B material's thermal coefficient of expansion (CTE) provides several key benefits to the circuit designer. The expansion coefficient of RO4350B material is similar to that of copper which allows the material to exhibit excellent dimensional stability, a property needed for mixed dielectric multi-layer boards constructions. The low Z-axis CTE of RO4350B laminates provides reliable plated through-hole quality, even in severe thermal shock applications. RO4350B material has a Tg of >280°C (536°F) so its expansion characteristics remain stable over the entire range of circuit processing temperatures.

Dielectric Constant (Dk): 3.48 ±0.05 @ 10 GHz/23°C Dissipation Factor: 0.0037 @ 10 GHz/23°C Thermal Conductivity: 0.69 W/m/°K CTE: X: 10 ppm/°C, Y: 12 ppm/°C, Z: 32 ppm/°C Tg: >280°C Moisture Absorption: 0.06% Flammability Rating: UL 94 V-0 Surface Finish: Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG) Board Thickness: 0.5mm (16.6mil core)

Ideal for multi-layer board (MLB) constructions Processes like FR-4 at lower fabrication costs Excellent dimensional stability Competitively priced Suitable for active devices and high power RF designs

Copper layer 1 - 35 μm Rogers RO4350B Core - 0.422 mm (16.6mil) Copper layer 2 - 35 μm

Components: 3 Total Pads: 10 Thru Hole Pads: 6 Top SMT Pads: 4 Bottom SMT Pads: 0 Vias: 5 Nets: 2

Cellular base station antennas and power amplifiers RF identification tags Automotive radar and sensors LNBs for direct broadcast satellites Active devices and high power RF designs

IPC-Class 2 compliant 100% electrical tested Global availability Gerber RS-274X support

RO4350B PCB

规格参数

Base MaterialRO4350B
Layer CountDouble sided (2-layer)
Board Dimensions42.3mm × 30.8mm (±0.15mm)
Minimum Trace/Space4/5 mils
Minimum Hole Size0.3mm
Via TypeThrough-hole only (No blind vias)
Finished Board Thickness0.5mm
Finished Cu Weight1oz (1.4 mils) outer layers
Via Plating Thickness20 μm
表面处理Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG)
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskGreen
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com