BICHENGPCBBicheng Technologies Limited

RO4003C + 370HR 10 层混合电路板 — 阻抗控制与高可靠性应用

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

起订量
1PCS
交期
12-15 working days
包装
Vacuum / Anti-static Packaging
付款方式
T/T, Paypal

产品简介

1. Introduction to RO4003C + 370HR Hybrid PCB

RO4000® series hydrocarbon ceramic laminates are designed to offer superior high frequency performance and low cost circuit fabrication. The result is a low loss material which can be fabricated using standard epoxy/glass (FR-4) processes at competitive prices.

370HR is a high performance 180°C glass transition temperature (Tg) FR-4 system for multilayer Printed Wiring Board (PWB) applications where maximum thermal performance and reliability are required. This system provides improved thermal performance and low expansion rates in comparison to traditional FR-4 while retaining FR-4 processability.

This 10-layer hybrid PCB combines RO4003C for outer layers (high frequency signal integrity) and 370HR for inner layers (thermal reliability), offering exceptional electrical performance, impedance control, and mechanical stability for demanding RF, microwave, and high-speed digital applications.

Dielectric constant of 3.38 ± 0.05 at 10 GHz (process) / 3.55 (design)

Thermal coefficient of dielectric constant (TCDk) of +40 ppm/°C

Compatible with standard FR-4 processing

CTE (Z-axis pre-Tg): 45 ppm/°C, (post-Tg): 230 ppm/°C

Dk of 4.04 @ 10 GHz, Df of 0.0250 @ 10 GHz

4. Benefits of RO4003C + 370HR Hybrid PCB

Combines high frequency performance (RO4003C) with thermal reliability (370HR)

Standard FR-4 processing for both materials – no PTFE special handling

Excellent dimensional stability for mixed dielectric multilayer constructions

Low Z-axis CTE ensures reliable plated through-hole quality

Impedance control ready for RF and high-speed digital designs

Halogen-free option (370HR) for environmentally conscious designs

Laser fluorescing and UV blocking for AOI compatibility

6. PCB Stackup (10-Layer Hybrid Rigid Structure)

L1 (Top Copper): 1 oz (0.035 mm) – 50Ω impedance trace: 12.2 mil width

L3 (Inner Copper): 0.5 oz (0.017 mm) – 80Ω diff pair: 3.5 mil trace / 5.5 mil spacing

Total Pressed Thickness: 1.618 mm (1.7 mm nominal)

Resin Plugging: All vias resin filled and capped

Asymmetric Copper: L5/L6 1 oz, L3/L4/L7/L8 0.5 oz

Impedance Control: 50Ω and 80Ω controlled lines

Accepted standard: IPC-Class-2 (typical)

370HR compliant with IPC-4101E Type /127, /128, /130

11. RO4003C High Frequency Laminate Introduction

RO4000 hydrocarbon ceramic laminates are designed to offer superior high frequency performance and low cost circuit fabrication. The result is a low loss material which can be fabricated using standard epoxy/glass (FR-4) processes at competitive prices.

RO4003C material possesses the properties needed by designers of RF microwave circuits, matching networks, and controlled impedance transmission lines. Low dielectric loss allows RO4003C to be used in many applications where higher operating frequencies limit the use of conventional circuit board laminates. The temperature coefficient of dielectric constant is among the lowest of any circuit board material, and the dielectric constant is stable over a broad frequency range.

RO4003C's thermal coefficient of expansion (CTE) is similar to that of copper, providing excellent dimensional stability and reliable plated through-hole quality, even in severe thermal shock applications. RO4003C has a Tg of >280°C, so its expansion characteristics remain stable over the entire range of circuit processing temperatures.

RO4003C laminates can easily be fabricated into printed circuit boards using standard FR-4 circuit board processing techniques. Unlike PTFE based high performance materials, RO4003C does not require specialized via preparation processes such as sodium etch.

12. 370HR High Performance Laminate Introduction

370HR is a high performance 180°C glass transition temperature (Tg) FR-4 system for multilayer Printed Wiring Board (PWB) applications where maximum thermal performance and reliability are required. 370HR laminate and prepreg products are manufactured with a unique high performance multifunctional epoxy resin, reinforced with electrical grade (E-glass) glass fabric.

This system provides improved thermal performance and low expansion rates in comparison to traditional FR-4 while retaining FR-4 processability. In addition to this superior thermal performance, the mechanical, chemical and moisture resistance properties all equal or exceed the performance of traditional FR-4 materials.

The 370HR system is also laser fluorescing and UV blocking for maximum compatibility with Automated Optical Inspection (AOI) systems, optical positioning systems and photoimagable solder mask imaging. 370HR has proven to be best in class for sequential lamination designs.

16. Standard Thicknesses, Panel Sizes & Claddings

Electrodeposited Copper Foil: ½ oz (18 μm) HH/HH, 1 oz (35 μm) H1/H1

应用领域

  • Dielectric constant of 3.38 ± 0.05 at 10 GHz (process) / 3.55 (design)
  • Dissipation factor of 0.0027 at 10 GHz
  • Thermal coefficient of dielectric constant (TCDk) of +40 ppm/°C
  • Tg >280°C (TMA)
  • Td of 425°C
  • Low moisture absorption of 0.06%
  • CTE (X/Y/Z): 11/14/46 ppm/°C
  • Thermal conductivity of 0.71 W/(m·K)
  • Compatible with standard FR-4 processing
  • No specialized via preparation required
10L RO4003C+370HR Hybrid PCB
STACK UP 10-Layer RO4003C + 370HR Hybrid PCB

规格参数

Base materialRO4003C (outer cores) + 370HR FR-4 (inner cores)
PrepregRO4450F (for RO4003C bonding) + 370HR prepreg
Layer count10 layers
Board dimensions132mm x 144mm = 1PCS
Finished board thickness1.618 mm
Finished Cu weightOuter layers: 1 oz (35 μm)Inner layers (L3/L4/L7/L8): 0.5 oz (17 μm)Inner layers (L5/L6): 1 oz (35 μm)
表面处理Immersion Gold (ENIG), 135%-150% thickness
Solder maskTop: blue, white legendBottom: blue, white legend
Special featuresBlind vias (L1-L2, L9-L10, L7-L10)Resin plugging (resin filled vias)Impedance control (50Ω, 80Ω)
Electrical test100%

层叠结构

  1. L1 (Top) · 50 Ω (single-ended) · 12.2 mil · – · ±10%core
  2. L3 · 80 Ω (differential) · 3.5 mil · 5.5 mil · ±10%core

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com