BICHENGPCBBicheng Technologies Limited

RO3010 2 层 0.127mm 电路板 — 高 Dk 陶瓷填充 PTFE 基材、沉金,适用于射频与车载雷达

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

Rogers RO3010 advanced circuit materials are ceramic-filled PTFE composites that offer a higher dielectric constant with excellent stability. They are competitively priced products with exceptional mechanical and electrical stability. This stability simplifies the design of broadband components and allows the materials to be used in a wide range of applications over a very broad range of frequencies. This material's characteristics make RO3010 laminates excellent for circuit miniaturization.

Dielectric constant of 10.2 ± 0.30 at 10 GHz / 23°C Dissipation factor of 0.0022 at 10 GHz / 23°C Low Coefficient of Thermal Expansion (-55 to 288°C): X: 13 ppm/°C, Y: 11 ppm/°C, Z: 16 ppm/°C Thermal decomposition temperature Td > 500°C Thermal Conductivity: 0.95 W/mK Moisture Absorption: 0.05% Operating Temperature Range: -40°C to +85°C

Material exhibits dimensional stability with expansion coefficient matched to copper Economical laminate pricing for volume manufacturing process ISO 9001 Certified Suitable for use with multi-layer board designs

Copper_layer_1 - 35 μm Rogers RO3010 - 0.127 mm (5mil) Copper_layer_2 - 35 μm

Components: 1 Total Pads: 4 Thru Hole Pads: 2 Top SMT Pads: 2 Bottom SMT Pads: 0 Vias: 4 Nets: 2

Automotive radar applications Global positioning satellite antennas Cellular telecommunications systems – power amplifiers and antennas Patch antenna for wireless communications Direct broadcast satellites Datalink on cable systems Remote meter readers Power backplanes

Artwork Format: Gerber RS-274-X Accepted Standard: IPC-Class-2 Availability: Worldwide

RO3010 PCB

规格参数

Base MaterialRO3010
Layer Count2-layer
Board Dimensions49mm × 27mm
Minimum Trace/Space4/5 mils
Minimum Hole Size0.2mm
Finished Board Thickness0.2mm
Finished Cu Weight1 oz (1.4 mils) outer layers
Via Plating Thickness20 μm
表面处理ENIG
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com