BICHENGPCBBicheng Technologies Limited

RO3006 电路板 2 层 5mil:面向车载雷达与无线通信系统的高频陶瓷填充 PTFE 层压板

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

Rogers RO3006 laminates are ceramic-filled PTFE composites engineered to deliver outstanding electrical and mechanical stability for commercial microwave and RF applications. These advanced circuit materials maintain a consistent dielectric constant (Dk) across a wide temperature range, effectively eliminating the step change in Dk commonly seen with PTFE glass materials near room temperature.

Rogers RO3006 ceramic-filled PTFE composites Dielectric constant of 6.15 ± 0.15 at 10 GHz/23°C Dissipation factor of 0.002 at 10 GHz/23°C Thermal degradation temperature greater than 500°C Thermal conductivity of 0.79 W/mK Moisture absorption of 0.02% Coefficient of thermal expansion (from -55 to 288 °C): X axis 17 ppm/°C, Y axis 17 ppm/°C, Z axis 24 ppm/°C

Uniform mechanical properties across various dielectric constants, making it ideal for multi-layer board designs and compatible with epoxy glass multi-layer board hybrid constructions. Low in-plane expansion coefficient that matches copper, ensuring reliable surface-mounted assemblies and excellent dimensional stability, particularly in temperature-sensitive applications. Economical laminate pricing due to a volume manufacturing process.

4.PCB Stackup: 2-layer rigid PCB Copper layer 1 - 35 µm Rogers RO3006 - 5 mil (0.127 mm) Copper layer 2 - 35 µm

Board dimensions: 51.51 mm x 25.5 mm = 1 piece Minimum trace/space: 4/6 mils Minimum hole size: 0.3 mm No blind vias. Finished board thickness: 0.25 mm Finished copper weight: 1 oz (1.4 mils) for outer layers Via plating thickness: 20 µm Surface finish: Immersion silver Top silkscreen: None Bottom silkscreen: None Top solder mask: None Bottom solder mask: None 100% electrical testing conducted prior to shipment

6.PCB Statistics Components: 9 Total pads: 23 Through-hole pads: 11 Top SMT pads: 12 Bottom SMT pads: 0 Vias: 19 Nets: 2

7. Type of Artwork SuppliedGerber RS-274-X

Automotive radar applications Global positioning satellite antennas Cellular telecommunications systems, including power amplifiers and antennas Patch antennas for wireless communications Direct broadcast satellites Datalink on cable systems Remote meter readers Power backplanes

RO3006 PCB 2-layer 5mil

规格参数

Board dimensions51.51 mm x 25.5 mm = 1 piece
Minimum trace/space4/6 mils
Minimum hole size0.3 mm
Finished board thickness0.25 mm
Finished copper weight1 oz (1.4 mils) for outer layers
Via plating thickness20 µm
表面处理Immersion silver
Top silkscreenNone
Bottom silkscreenNone
Top solder maskNone
Bottom solder maskNone
Components9
Total pads23
Through-hole pads11
Top SMT pads12
Bottom SMT pads0
Vias19
Nets2

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com