BICHENGPCBBicheng Technologies Limited

面向车载雷达应用的 RO3003G2 2 层电路板 0.2mm 薄板、沉金

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

RO3003G2 high-frequency laminates represent Rogers' advanced solution for millimeter-wave automotive radar needs. Developed based on industry feedback, these ceramic-filled PTFE composites feature: Specially formulated resin/filler system for reduced insertion loss Homogeneous construction with VLP ED copper (16/17/18 ppm/°C CTE) Enhanced thermal stability (-35 ppm/°C Dk coefficient) Ultra-low dielectric loss (0.0011 @10GHz)

This makes RO3003G2 ideal for 77GHz radar modules where signal integrity is critical.

Dielectric Constant (Dk): 3.0 ±0.04 at 10 GHz Dissipation Factor: 0.0011 at 10 GHz Thermal Coefficient of Dk: -35 ppm/°C Thermal Conductivity: 0.50 W/m/K CTE: X: 17 ppm/°C, Y: 16 ppm/°C, Z: 24 ppm/°C Tg: >280°C Moisture Absorption: 0.04% Surface Finish: Immersion Gold (ENIG)

Industry-leading insertion loss performance Minimized Dk variation in finished PCBs Supports high-density via designs Reliable operation in automotive temperature ranges

Copper layer 1 - 35 μm Rogers RO3003G2 Core - 0.127 mm (5mil) Copper layer 2 - 35 μm

Components: 8 Total Pads: 31 Thru Hole Pads: 17 Top SMT Pads: 14 Bottom SMT Pads: 0 Vias: 42 Nets: 2

Adaptive Cruise Control Forward Collision Warning Lane Change Assist 77GHz Automotive Radar Blind Spot Detection

IPC-Class 2 compliant 100% electrical tested Global availability Gerber RS-274X support

RO3003G2 PCB

规格参数

Base MaterialRO3003G2 (Rogers)
Layer Count2
Board Dimensions95×95mm (±0.15mm)
Min. Trace/Space14/14 mils
Min. Hole Size0.2mm
Board Thickness0.2mm
Copper Weight1oz outer (35μm)
Via Plating20μm
表面处理Immersion Gold (ENIG)
SilkscreenNone
Solder MaskNone
Electrical Test100% tested

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com