BICHENGPCBBicheng Technologies Limited

Isola MT40 2 层 0.254mm 沉银高速数字与射频电路板

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

起订量
1PCS
交期
7-13 working days
包装
Vacuum / Anti-static Packaging
付款方式
T/T, Paypal

产品简介

1. Introduction to Isola MT40 High Speed Digital & RF PCB

The Isola I-Tera MT40 laminate is suitable for many of today's high speed digital and RF/microwave printed circuit designs. I-Tera MT40 features a dielectric constant (Dk) that is stable between -55°C and +125°C up to W-band frequencies. In addition, I-Tera MT40 offers a low dissipation factor (Df) of 0.0031 making it a cost effective alternative to PTFE and other commercial microwave and high-speed digital laminate materials.

I-Tera MT40 laminate materials are currently being offered in both laminate and prepreg form in typical thicknesses and standard panel sizes. This provides a complete materials solution package for high-speed digital multilayer, hybrid, RF/microwave, multilayer and double-sided printed circuit designs. I-Tera MT40 does not require any special through hole treatments commonly needed when processing PTFE-based laminate materials.

This 2-layer rigid PCB is constructed entirely with MT40 as the core material at 0.254mm (10mil) thickness, with immersion silver surface finish, white top silkscreen, no solder mask, and 1oz copper on both sides. Its stable DK of 3.45 offers excellent high-frequency performance, making it ideal for demanding applications such as high speed digital, RF/microwave, multilayer and double-sided printed circuit designs.

Glass Transition Temperature (Tg): 215°C (DSC), 230°C (DMA), 210°C (TMA)

Decomposition Temperature (Td): 360°C @ 5% weight loss

Z-Axis CTE: 55 ppm/°C (Pre-Tg), 290 ppm/°C (Post-Tg)

Metal edge wrapping at designated positions

Lead-free assembly compatible, FR-4 process compatible

Stable DK (3.45) — Consistent impedance control for high-speed digital and RF designs

Low Df (0.0031) — Excellent high-frequency performance with minimal signal loss

High Tg (215°C) — Excellent thermal reliability for lead-free assembly

No special through hole treatments required — Simplified processing compared to PTFE materials

FR-4 Process Compatible — Standard PCB fabrication processes can be used

RoHS Compliant & CAF Resistant — Environmentally friendly and reliable

Multiple reflow and lamination cycles capable — Suitable for complex multilayer designs

Immersion Silver Finish — Excellent solderability, corrosion resistance, and electrical performance

5. PCB Stackup (2-Layer Rigid Structure)

6. Isola I-Tera MT40 Material – Product Introduction

Thermal Performance Tg: 215°C (DSC), 230°C (DMA), 210°C (TMA) Td: 360°C @ 5% weight loss

Electrical Performance Dk: 3.45 @ 2GHz Df: 0.0031 @ 2GHz

I-Tera MT40 is suitable for many of today's high speed digital and RF/microwave printed circuit designs. I-Tera MT40 features a dielectric constant (Dk) that is stable between -55°C and +125°C up to W-band frequencies. In addition, I-Tera MT40 offers a lower dissipation factor (Df) of 0.0031 making it a cost effective alternative to PTFE and other commercial microwave and high-speed digital laminate materials.

Product Features: • RoHS Compliant • CAF resistant • Lead-free assembly compatible • FR-4 process compatible • Multiple reflow capable • Multiple lamination cycles • Currently manufactured in Asia, North America, Europe

Product Availability: • Standard Laminate: 2 to 24 mil (0.05 to 0.61 mm) • Copper Foil types: HVLP (VLP2) ≤2.5 micron Rz JIS, RTF (Reverse Treat Foil), Embedded resistor foil • Copper weight: 0.5, 1 and 2 oz (18, 35 and 70 μm) available; heavier and thinner available • Prepreg available with tooling and moisture barrier packaging • Glass Fabric: E-glass, Square weave glass, Mechanically spread glass

8. Isola I-Tera MT40 Typical Properties (Data Sheet)

High speed digital printed circuit designs

Multilayer and hybrid printed circuit designs

Telecommunications and networking equipment

Type of artwork supplied: Gerber RS-274-X

11. Standard Thickness, Panel Sizes & Claddings

Dielectric Constant is tested in the Z-direction of the material using IPC-TM-650 2.5.5.5 Stripline method.

All test data are typical measurement values intended to assist customers in material selection. They do not constitute any express or implied warranty and do not guarantee performance in specific applications. Customers are responsible for verifying the suitability of Isola materials for each application.

I-Tera MT40 is manufactured in Asia, North America, and Europe.

应用领域

  • Dielectric Constant (DK): 3.45 @ 2GHz
  • Dissipation Factor (Df): 0.0031 @ 2GHz
  • Glass Transition Temperature (Tg): 215°C (DSC), 230°C (DMA), 210°C (TMA)
  • Decomposition Temperature (Td): 360°C @ 5% weight loss
  • Z-Axis CTE: 55 ppm/°C (Pre-Tg), 290 ppm/°C (Post-Tg)
  • X/Y-Axis CTE: 12 ppm/°C (Pre-Tg)
  • Thermal Conductivity: 0.61 W/m·K
  • Immersion Silver surface finish
  • White top silkscreen, no solder mask
  • Board dimensions: 108mm x 35mm = 1PCS
  • Metal edge wrapping at designated positions
  • RoHS Compliant, CAF resistant
  • Lead-free assembly compatible, FR-4 process compatible
Isola MT40 2-Layer 0.254mm Immersion Silver High Speed Digital & RF PCB
Isola MT40 Material

规格参数

Base materialIsola I-Tera MT40 (Thermoset Laminate)
Layer count2-layer rigid PCB
Board dimensions108mm x 35mm = 1 PCS
Minimum Trace/SpaceSpecified by design
Minimum Hole SizeSpecified by design
Blind viasNo
Finished board thickness0.254mm (10mil) core + copper
Finished Cu weight1 oz (35 μm / 1.4 mils) all layers
Via plating thicknessStandard
表面处理Immersion Silver
Top Solder MaskNo
Bottom Solder MaskNo
Top SilkscreenWhite
Bottom SilkscreenNo
Metal Edge WrappingAt designated positions
Quality standardIPC-Class-2
100% Electrical testUsed prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com