BICHENGPCBBicheng Technologies Limited

面向射频与军用电子设备的 IsoClad 933 2 层高频电路板

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

IsoClad 933 is a premium PTFE-based laminate designed for high-frequency printed circuit boards. This 2-layer PCB material combines nonwoven fiberglass reinforcement with PTFE's exceptional electrical properties, offering outstanding signal integrity for RF, microwave, and defense electronics.

Low Dielectric Constant: 2.33 at 10GHz for minimal signal loss Ultra-Low Dissipation: 0.0016 loss tangent at high frequencies Thermal Stability: -132 ppm/°C thermal coefficient of dielectric constant Mechanical Strength: 10 lbs/inch peel strength for durability High Voltage Resistance: >45 kV dielectric breakdown Flame Retardant: UL94 V-0 certification

Copper layer 1 - 35 μm IsoClad 933 Core - 31mil (0.787 mm) Copper layer 2 - 35 μm

Components: 16 Total Pads: 35 Thru Hole Pads: 21 Top SMT Pads: 14 Bottom SMT Pads: 0 Vias: 16 Nets: 2

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class 2 Availability: Worldwide shipping

Less rigid than woven fiberglass, suitable for flexible applications. Highly isotropic in X, Y, and Z directions for consistent performance.

Conformal antennas Stripline and microstrip circuits Missile guidance systems Radar and electronic warfare systems

规格参数

Base MaterialIsoClad 933
Layers2
Board Size50mm × 60mm (±0.15mm)
Trace/Space4/4 mils
Min Hole Size0.25mm
Board Thickness0.8mm
Copper Weight1oz (outer layers)
Via Plating20 μm
表面处理ENIG
SilkscreenNone (Top/Bottom)
Solder MaskNone (Top/Bottom)
Electrical Test100% tested

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com