BICHENGPCBBicheng Technologies Limited

F4BTMS1000 电路板 2 层 6.35mm 厚、高导热,适用于航空航天与射频馈电网络

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

The F4BTMS series represents an enhanced version of the F4BTM series, achieving significant advancements in material formulation and manufacturing processes. This upgraded material integrates a substantial amount of ceramics and is reinforced with ultra-thin, ultra-fine glass fiber cloth, leading to considerable improvements in performance and a wider range of dielectric constants. It is a highly reliable material ideal for aerospace applications and can effectively replace similar foreign products.

By using a minimal quantity of ultra-thin glass fiber cloth along with a large volume of uniformly distributed specialized nano-ceramics mixed with polytetrafluoroethylene resin, the series mitigates the negative impacts of glass fiber on electromagnetic wave propagation. This results in reduced dielectric loss, improved dimensional stability, and lower X/Y/Z anisotropy. Furthermore, it enhances the usable frequency range, electrical strength, and thermal conductivity, while also exhibiting a low thermal expansion coefficient and stable dielectric temperature characteristics.

A standard feature of the F4BTMS series is the RTF low roughness copper foil, which minimizes conductor loss and offers excellent peel strength. The material is compatible with both copper and aluminum substrates.

Dielectric constant (Dk): 10.2 at 10GHz Dissipation factor: 0.0020 at 10GHz; 0.0023 at 20GHz Coefficient of Thermal Expansion (CTE): - X-axis: 16 ppm/°C - Y-axis: 18 ppm/°C - Z-axis: 32 ppm/°C Temperature range: -55°C to 288°C Low thermal coefficient of Dk: -320 ppm/°C (from -55°C to 150°C) High thermal conductivity: 0.81 W/mK Low moisture absorption: 0.03%

Board dimensions: 98mm x 98mm (1 piece), ± 0.15mm tolerance Minimum trace/space: 6/6 mils Minimum hole size: 0.6mm No blind vias Finished board thickness: 6.4mm Finished copper weight: 1 oz (1.4 mils) on outer layers Via plating thickness: 20 µm Surface finish: Bare copper Top Silkscreen: White Bottom Silkscreen: None Top Solder Mask: None Bottom Solder Mask: None 100% electrical testing conducted prior to shipment

Aerospace equipment, space and cabin equipment Microwave and RF applications Radar and military radar systems Feed networks Phase-sensitive antennas and phased array antennas Satellite communications, among others

F4BTMS1000 PCB 2-layer 6.35mm Thick

规格参数

Dielectric constant (Dk)10.2 at 10GHz
Dissipation factor0.0020 at 10GHz; 0.0023 at 20GHz
Temperature range-55°C to 288°C
Low thermal coefficient of Dk-320 ppm/°C (from -55°C to 150°C)
High thermal conductivity0.81 W/mK
Low moisture absorption0.03%
Configuration2-layer rigid PCB
Copper Layer 135 µm
F4BTMS1000 Core6.35 mm (250 mil)
Copper Layer 235 µm
Board dimensions98mm x 98mm (1 piece), ± 0.15mm tolerance
Minimum trace/space6/6 mils
Minimum hole size0.6mm
Finished board thickness6.4mm
Finished copper weight1 oz (1.4 mils) on outer layers
Via plating thickness20 µm
表面处理Bare copper
Top SilkscreenWhite
Bottom SilkscreenNone
Top Solder MaskNone
Bottom Solder MaskNone
Components28
Total Pads58
Through Hole Pads27
Top SMT Pads31
Bottom SMT Pads0
Vias35
Nets2

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com