BICHENGPCBBicheng Technologies Limited

面向高频射频与微波应用的 F4BTM350 2 层 3.1mm 厚电路板

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

Wangling's F4BTM350 laminates are engineered through a scientific formulation of fiberglass cloth, nano-ceramic fillers, and polytetrafluoroethylene resin, followed by stringent pressing processes. This series builds upon the F4BM dielectric layer by incorporating high-dielectric, low-loss nano-ceramic materials. The result is a laminate with a higher dielectric constant, improved heat resistance, a lower thermal expansion coefficient, higher insulation resistance, and enhanced thermal conductivity—all while maintaining excellent low-loss characteristics.

F4BTM350 and F4BTME350 share the same dielectric layer but differ in copper foil type: F4BTM uses ED copper foil and is suitable for applications without PIM (Passive Intermodulation) requirements, while F4BTME uses reverse-treated (RTF) copper foil, offering superior PIM performance, more precise line control, and reduced conductor loss.

Dielectric constant (Dk) of 3.5 ±0.07 at 10GHz Dissipation factor of 0.0025 at 10GHz CTE: x-axis 10 ppm/°C, y-axis 12 ppm/°C, z-axis 51 ppm/°C (-55°C to 288°C) Low thermal coefficient of Dk: -60 ppm/°C (-55°C to 150°C) Moisture absorption ≤ 0.05% Flammability rating: UL-94 V0 CTI > 600V, Grade 0

3.Benefits of Using F4BTM350 in PCB Design

Excellent high-frequency performance with stable Dk and low loss Enhanced thermal and mechanical reliability Suitable for precision RF and microwave circuits Compatible with immersion gold surface finish for improved solderability and shelf life Supports fine trace/spacing down to 5/7 mils for high-density designs

Copper layer 1: 35µm F4BTM350 core: 3.048mm (120mil) Copper layer 2: 35µm

Components: 58 Total pads: 139 Through-hole pads: 97 Top SMT pads: 42 Bottom SMT pads: 0 Vias: 68 Nets: 2

Microwave, RF, and radar systems Phase shifters Power dividers, couplers, combiners Feed networks Phase-sensitive antennas, phased array antennas Satellite communications Base station antennas

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

F4BTM350 PCB

规格参数

Base MaterialF4BTM350
Layer Count2-layer
Board Dimensions328mm x 84.08mm (±0.15mm)
Minimum Trace/Space5/7 mils
Minimum Hole Size0.4mm
Blind ViasNo
Finished Board Thickness3.1mm
Finished Cu Weight (Outer)1oz (1.4 mils)
Via Plating Thickness20µm
表面处理Immersion Gold
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskBlack
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com