BICHENGPCBBicheng Technologies Limited

面向射频/微波应用的 F4BM265 高频电路板,6.2mm 厚芯板

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

1.Product Introduction: Advanced PTFE Composite Material

The F4BM265 laminate represents a significant advancement in high-frequency circuit materials, combining fiberglass cloth, PTFE resin, and PTFE film through a scientifically formulated pressing process. This improved version of F4B offers superior electrical performance with a wider range of dielectric constants, lower loss, higher insulation resistance, and enhanced stability. The material comes in two variants: F4BM with standard ED copper for general applications, and F4BME with reverse-treated foil (RTF) copper for superior PIM performance and conductor loss reduction.

Precision Dielectric Constant: 2.65±0.05 @10GHz Low Signal Loss: 0.0013 dissipation factor @10GHz Temperature Stability: -100 ppm/°C ΔDk (-55°C to 150°C) CTE Characteristics: 14/17/142 ppm/°C (X/Y/Z axes) Thermal Conductivity: 0.36 W/mK Moisture Resistance: 0.08% absorption

F4BM265 Core - 3.0 mm (118mil) Copper layer 2 - 35 μm ---------------Bonding ply -------------- F4BM265 Core - 3.0 mm (118mil) Copper layer 3 - 35 μm

Components: 49 Total Pads: 177 Thru Hole Pads: 79 Top SMT Pads: 98 Bottom SMT Pads: 0 Vias: 164 Nets: 6

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class 2 Availability: Worldwide shipping

Optimized PTFE Formulation: Improved over standard F4B materials Dimensional Stability: Tight CTE control for reliable plated through-holes Design Flexibility: Available with ED or RTF copper options High-Frequency Performance: Stable electrical properties up to 20GHz

Microwave, RF, and radar systems Phase shifters, passive components Power dividers, couplers, combiners Feed networks, phased array antennas Satellite communications Base station antennas.

规格参数

Base MaterialF4BM265 PTFE Composite
Layer Count3-Layer
Board Dimensions168mm × 168mm (±0.15mm)
Minimum Trace/Space6/8 mils
Minimum Hole Size0.4mm
Via TypeThrough-Hole Only
Finished Thickness6.2mm
Copper Weight1oz (35μm) all layers
Via Plating Thickness20μm
表面处理Bare Copper
Silkscreen (Top/Bottom)None / None
Solder Mask (Top/Bottom)None / None
Electrical Testing100% tested prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com