BICHENGPCBBicheng Technologies Limited

面向微波与射频应用的 F4BM220 高性能 2 层电路板

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

Wangling's F4BM220 laminates are developed through a precise formulation and pressing of fiberglass cloth, polytetrafluoroethylene (PTFE) resin, and PTFE film. Compared to F4B220, it offers improved electrical performance due to lower dielectric loss, higher insulation resistance, and enhanced stability, making it a suitable alternative to similar foreign products.

The F4BM220 and F4BME220 share the same dielectric layer but use different copper foil combinations: F4BM220 utilizes ED copper foil for applications without PIM requirements, while F4BME220 employs reverse-treated foil (RTF) for excellent PIM performance and reduced conductor loss.

By adjusting the ratio of PTFE to fiberglass cloth, both F4BM220 and F4BME220 achieve precise control over the dielectric constant, resulting in low loss and enhanced dimensional stability.

Dielectric Constant (Dk): 2.2 ± 0.04 at 10GHz Dissipation Factor: 0.001 at 10GHz CTE: X-axis: 25 ppm/°C Y-axis: 34 ppm/°C Z-axis: 240 ppm/°C (from -55°C to 288°C) Thermal Coefficient of Dk: -142 ppm/°C (from -55°C to 150°C) Moisture Absorption: ≤ 0.08% Flammability Rating: UL-94 V0

Components: 43Total Pads: 94Through-Hole Pads: 56Top SMT Pads: 38Bottom SMT Pads: 0Vias: 51Nets: 2

Microwave, RF, and radar systemsPhase shiftersPower dividers, couplers, and combinersFeed networksPhase-sensitive and phased array antennasSatellite communicationsBase station antennas

F4BM220 PCB 2-layer 1.575mm Thick

规格参数

Base MaterialF4BM220
Layer Count2 layers
Board Dimensions130.5mm x 103mm (1 piece, +/- 0.15mm)
Minimum Trace/Space4/6 mils
Minimum Hole Size0.3mm
Blind ViasNone
Finished Board Thickness1.7mm
Finished Copper Weight1oz (1.4 mils) on outer layers
Via Plating Thickness20 µm
表面处理Electroless Nickel Immersion Gold (ENIG)
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Testing100% electrical test prior to shipment

层叠结构

  1. Copper Layer 1 · 35 µmcopper
  2. F4BM220 Core · 1.575 mmcore
  3. Copper Layer 2 · 35 µmcopper

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com