BICHENGPCBBicheng Technologies Limited

面向射频与天线应用的 CLTE-XT 2 层超薄 0.25mm 电路板,沉金

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

Rogers CLTE-XT laminates are advanced composites of micro-dispersed ceramic filler, PTFE, and woven fiberglass reinforcement. They are engineered to improve loss tangent while providing the lowest insertion loss and highest degree of dimensional stability in their class. Building on the reliability of the CLTE laminates, CLTE-XT maintains its properties over an even wider temperature range, making it ideal for demanding RF and microwave applications.

Composite material: Micro-dispersed ceramic filler, PTFE, and woven fiberglass Dielectric Constant: 2.79 to 2.94 by thickness at 10GHz, 23°C @ 50% RH Dissipation Factor: 0.0010 at 10GHz, 23°C @ 50% RH CTE: X-axis 12.7 ppm/°C, Y-axis 13.7 ppm/°C, Z-axis 40.8 ppm/°C Thermal Decomposition Temperature (Td): 539°C Thermal Coefficient of Dielectric Constant: -8 ppm/°C Tight dielectric constant tolerance: ±0.03 Low Moisture Absorption: 0.02%

High plated through-hole reliability Repeatable lot-to-lot performance Reduced circuit losses without sacrificing dimensional stability Dielectric constant stability with temperature change reduces stress attachment to ceramic active devices

Copper_layer_1 - 35 μm Rogers CLTE-XT Core - 0.129mm (5.1mil) Copper_layer_2 - 35 μm

Components: 6 Total Pads: 27 Thru Hole Pads: 15 Top SMT Pads: 12 Bottom SMT Pads: 0 Vias: 8 Nets: 2

Advanced Driver Assistance Systems (ADAS), Patch Antennas, Phased Array Antennas, Power Amplifiers, Ground-based and airborne communications and radar systems.

IPC-Class 2 compliant 100% electrical tested Global availability Gerber RS-274X support

CLTE-XT PCB

规格参数

Base MaterialCLTE-XT
Layer Count2 layers
Board Dimensions63mm x 35mm (±0.15mm)
Min. Trace/Space5/6 mils
Min. Hole Size0.3mm
Blind ViasNo
Finished Thickness0.25mm
Cu Weight (Outer)1 oz (1.4 mils)
Via Plating Thickness20 μm
表面处理Immersion Gold
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com